Review: Tech 21 Fly Rig 5

****

Tech 21 Fly Rig 5 – with Strat

Tech 21 NYC is the company behind many groundbreaking products, such as the SansAmp range of amp modelling stomp boxes, the Bass Driver DI or the all-analogue modelling guitar amps of the Trademark series.

What all these products have in common is that they’re no-nonsense tools to make the life of the gigging and recording guitarist (and bassist) easier.

Tech 21’s newest product is designed to do away with the need to hire a guitar amp for fly-in gigs. It’s an ultra-compact and sleek, pedalboard-style device called the Fly Rig 5.

****

Tech 21 Fly Rig 5 – full top

As you can see from the picture at the start of this review, the Tech 21 Fly Rig 5 (current price in Finland: 299 €) is extremely compact. It will fit in the pouch of a gig bag, as well as in the accessories compartment of many guitar cases. Just pack your guitar, the Fly Rig, a couple of cables and your tuner – and you’re ready to roll!

The Fly Rig 5’s sturdy housing is completely made from metal, and its brushed fascia gives it a cool modern look.

Tech 21 Fly Rig 5 – with PSU

The unit runs on 12 Volts of DC-power (150 mA/centre negative) and the power supply unit is (naturally) included.

Tech 21 Fly Rig 5 – Plexi + Hot

Tech 21 call their new creation the Fly Rig 5, because it features five different main functions/effects.

Two of these functions are grouped together under the Plexi banner. The first one, labelled Hot, is an adjustable clean boost of up to a whopping 21 dB. Secondly, you will find an analogue model of a Marshall Plexi head (based on the Hot-Rod Plexi pedal), with its controls comprising Drive, Tone and Level.

Tech 21 Fly Rig 5 – SansAmp

The next section is called SansAmp and includes Tech 21’s legendary analogue amp (and miked up cabinet) emulator (with three-band EQ), as well as a reverb effect.

Tech 21 Fly Rig 5 – DLA

The last section is labelled DLA (short for delay) and offers you a delay effect with tap tempo. Thanks to the Drift-control you can also dial in grungy tape echo-type wow and flutter.

Tech 21 Fly Rig 5 – front panel

****

Tech 21 Fly Rig 5 – Tech 21 logo

Tech 21’s Fly Rig 5 is really very easy to use: All the controls and footswitches are clearly labelled, and the control knobs of each section light up in a different colour to give you an easy to read visual clue as to which sections are currently on and which are turned off.

There’s one very minor trade-off due to the über-compact nature of this ’board, and that’s the small, slightly fiddly nature of the control knobs. On the other hand, you’re hardly likely to make major adjustments to your settings in the middle of a gig – and gigging is what the Fly Rig was conceived for.

In terms of its sound and performance, Tech 21’s newcomer easily fulfills the high standards guitarists have come to expect of the products of this company. The Fly Rig 5 sounds awesome and does exactly what it says on the tin. This combination of SansAmp, Plexi-style overdrive, booster, delay and reverb delivers the goods for the large majority of guitarists – be it Jazz, Blues, Rockabilly, Pop or Rock, the Fly Rig delivers! Metal and Thrash guitarists will most probably demand more gain and the inlusion of a noise gate, but I’d reckon that the metal crowd aren’t really the intended target group for this type of ’board.

Here’s a run-through of all of the Fly Rig 5’s effects, played on a maple-necked Fender Stratocaster. The clip starts with the Fly Rig turned off:

Here’s a similar run-through using a humucker-equipped Hamer USA Studio Custom, adding a bit more overdrive and a longer delay time:

The Delay-section’s Drift-control makes it easy to simulate tape echo effects:

A ”hidden” feature of the Fly Rig 5 is the possibility to use the Delay-section as a chorus effect. Because a chorus is basically nothing more than a slightly wobbly, very slightly offset doubling of the guitar signal, you can achieve this effect by setting the Delay-section’s Time-control to something very short, and using the Drift-control to adjust the chorus’ depth. Here’s an audio clip of a chorus setting, played with a Strat:

Tech 21 Fly Rig 5 – angle 2 + lights

****

Tech 21 Fly Rig 5 – all on

If you play a lot of fly-in gigs, and have neither the budget nor the manpower to lug a large guitar rig across the globe, Tech 21 NYC’s Fly Rig 5 is a true godsend.

It offers the most important features and effects a guitarist needs on stage or in the studio. And — most importantly – it sounds really great and inspiring.

True, using a device like the Fly Rig may not be as ”authentic” as using a real amp in the eyes of some anoraks, because Tech 21’s brand-new tool doesn’t have the ”kudos” of a mythical vintage amp. But if you’re after a pro-quality, lightweight, no-nonsense solution that will get your sound to the audience with the least amount of fuss and hassle, Tech 21’s Fly Rig 5 is hard to beat!

****

Tech 21 NYC Fly Rig 5

299 €

Finnish distributor: Musamaailma

****

Pros:

+ sturdy, all-metal construction

+ size

+ weight

+ features

+ sound

+ value for money

Cons:

– tiny control knobs

Tech 21 Fly Rig 5 – angle 1

Review: Albion TCT35C

****

Albion TCT35 – with Telecaster

Albion Amplification is a new name on the Finnish market, even though the brand has been in existence since 2010.

Albion’s main man is genuine amp guru and bonafide living legend Steve Grindrod. Mr Grindrod left an indelible mark in the field of amplifier design as Marshall’s chief designer for over 20 years. In the beginning of the Noughties, after leaving Marshall, he also worked for Vox for a few years.

Albion was founded in 2009 as a joint venture between Grindrod and Chinese audio specialists IAG Group. Albion’s guitar and bass amplifiers are produced in their own plant in China under the direct supervision of Steve Grindrod, who has moved there from the UK.

****

Albion TCT35 – full front

The Albion TCT35C (recommended retail price in Finland: 865 €) is part of the company’s TCT-series, which is aimed directly at the guitarist who needs a versatile amp.

The TCT-series offers two-channel, all-valve amplifiers built with a very open architecture that allows for maximum flexibility. At the moment of writing, the TCT-series comprises two combos and three amp heads.

Albion TCT35 – side view 2

The TCT35C has a cabinet made of high-quality birch plywood. The panel carrying the golden script logo is a solid piece of walnut, which has received a piano black finish on our review sample (there’s also a see-through wine red version available).

The overall finishing quality is on a very high level, and the TCT35C looks rather stylish in a businesslike, slightly understated way.

The combo weighs in at about 24 kilos, which is rather moderate for an all-valve amp of this size.

Albion TCT35 – full back

The cabinet features a half-closed back with a sturdy metall grille protecting the valves (or ”tubes”, for our North American friends).

Albion TCT35 – preamp valves

Albion’s TCT35C employs three 12AX7 valves (aka ECC83) in its preamplifier section. A fourth 12AX7 is used as the combo’s phase inverter.

Albion TCT35 – power amp valves

The power amp section churns out approximately 35 Watts of power (RMS), using a pair of 6L6 valves.

All Albion amps use IAG Group’s pro-quality audio transformers, which are well regarded by Hifi-enthusiasts and used in IAG’s Leak and Luxman valve amplifiers.

Albion TCT35 – G1280-VSR-16 speaker

Albion produces all of their PCBs, metal parts and speakers in their own factory to Steve Grindrod’s exacting specifications.

The TCT35C comes equipped with a 12-inch Albion G1280-VSR-16 speaker, which has power rating of 80 Watts and an impedance of 16 Ohms.

Albion TCT35 – footswitch

A two-switch footswitch unit comes supplied with the combo. It allows for channel switching, as well as the muting of the on-board digital reverb unit.

The unit is shipped with the output jack on the right hand side, but if you prefer to have the connector on the left, you can switch things around easily. Simply unscrew the six screws holding the footswitch assembly in the chassis, pull the assemby out, turn it around, put the switches back into the chassis and tighten the screws. Brilliantly easy!

****

Albion TCT35 – front panel

Even though both of the Albion TCT35C’s channels sport the same controls, the channels have been designed differently:

In Channel A the guitar signal is first routed through the EQ-section, before it reaches the main gain stages. In Channel B the signal first goes from the input jack to the gain section and is only then fed into the EQ-department. Even though both channels will give you sounds from clean all the way to high gain, each channel has its own distinct character and ”feel”.

One special feature of TCT-series amps are their twin gain controls – called Gain and Drive. The first amplification stage is called Gain, while the second one is called Drive, and each adds their own type of gain structure and character to a channel’s tone. By experimenting with different combinations of a channel’s Gain and Drive settings you will get a plethora of different sounds and responses to playing dynamics.

Albion TCT35 – front panel 2

The combo’s Master-section offers some additional features for even more tonal flexibility:

The Edge-control is a presence/brightness control for the power amp, which allows you to tailor the TCT35C’s bite to your own requirements. The F’BK-switch (short for ”feedback”) offers you two different power amp responses – you can either go for more bite and a very tight attack or choose a creamier delivery with much more fat compression.

Steve Grindrod has chosen to use digital reverb on his TCT-amps, because they tend to stand up better to the demands of a high gain amp.

Thanks to its output power switch you can also run the combo at only 33 % of its output power. As were dealing with a genuine valve amp here, this power drop also lowers the clean headroom and adds some tasty power amp compression to the signal.

Albion TCT35 – back panel

The TCT35C’s effects loop is deliberately using solid state technology, as Steve Grindrod aims for a clean and transparent signal transfer in this section.

****

Albion TCT35 – side view 1

The Albion TCT35C combo is an extremely flexible guitar amp, thanks to its well-designed channel architecture and its extremely efficient channel equalisers.

This isn’t a one-trick pony at all, but rather a guitar sound enthusiast’s dream machine, offering a large palette of different tones.

Despite the fact that both channels will ”do” clean as well as dirty tones, Channel B will offer you more gain than Channel A. ”Fender-style” and ”Marshall-style” are far too narrow to adequately describe the different characters provided by Channels A and B, but there are clear differences apparent in their mid-range sounds and bass responses.

The effective Channel EQs, as well as the Master-section’s Edge- and Feedback-controls add their bits to the Albion’s versatility. While the TCT35C is quite an intuitive amp to use, I’d still recommend you take your time to find out all the features and sounds this combo has to offer.

These eight audio clips only scratch the surface of what the Albion TCT35C’s tonal versatility.

Let’s start with two clean examples using Channel A; first the Stratocaster:

…followed by a Les Paul-style Hamer Studio Custom:

Here are two crunchy clips played through Channel A. First the Strat:

…and then the Hamer:

These are two crunchy clips using Channel B – the Stratocaster first:

…followed by the double-humbucker Hamer:

And as a finale two high gain examples (Channel B) – starting with the Strat:

…and finishing with the Hamer (in Drop-D):

****

Albion TCT35 – teaser

Wow, what a fantastic amp! I can’t think of any musical genre the Albion TCT35C couldn’t master.

The TCT35C is an extremely versatile valve amplifier offering loads of great sounds. Despite being quite a compact combo there’s plenty of volume on tap.

Steve Grindrod’s vast knowledge and experience in the field of amp design really shows in the way the Albion is put together, as well as in the quality of the sounds on offer in the TCT35C and in the low amounts of hiss (even in high gain settings).

****

Albion TCT35C

Current RRP in Finland – 865 € (street price approximately 800 €)

Finnish distributor: Profitron

****

Pros:

+ excellent value for money

+ versatile gain section

+ separate powerful three-band EQ-sections

+ sound

+ switchable output power

+ footswitch included

Pidä blogia WordPress.comissa.

Ylös ↑