Review: Italia Fiorano Standard + Mondial Deluxe

Italia Fiorano Standard – full front

The Italia Fiorano Standard (price in Finland approx.  640 €) is a beautiful thinline, double-cutaway semi.

The Fiorano’s body is made by routing large pockets into the front of a solid mahogany body. In contrast to Italia’s Rimini 6 or Mondial Deluxe models the Fiorano doesn’t have a full centre block, though, but features an opening in the block between the guitar’s pickups. The body is then finished by glueing on a bound spruce top.

Italia Fiorano Standard – headstock

Hard rock maple is used for the Fiorano Standard’s neck.

Italia Fiorano Standard – tuners

The modern tuning machines are embossed with the I-for-Italia logo, and work very nicely.

Italia Fiorano Standard – fretboard

The bound fretboard sports Italia’s stylish inlays, consisting of pearloid blocks and abalone dots.

Italia Fiorano Standard – body beauty 2

The Fiorano Standard’s neck is glued in at the 19th fret.

Italia Fiorano Standard – bridge

Great to see Italia using a modern version of the venerable Tune-o-Matic-bridge. The updated design does away with the annoying and ever-rattling piece of wire, used to keep the bridge saddles in place in the vintage version.

Italia Fiorano Standard – tailpiece

The snazzy chrome tailpiece adds its own bit of panache to this stylish semi.

Italia Fiorano Standard – pickups

As you might know by now, I’m something of a P-90 fan. The Fiorano Standard comes equipped with not one, but two of my favourite pickups. These are made by Wilkinson and come with chromed dog-ear covers.

Italia Fiorano Standard – controls

Like many of Italia’s models, the Fiorano also features a sping-suspended plastic tray as an unusual control cavity cover. The electronics comprise a three-way toggle, as well as master volume and tone controls.

****

Italia Mondial Deluxe – full front

Italia’s Mondial Deluxe (price in Finland approx. 675 €) is a genuine semiacoustic hybrid, offering you a piezo-equipped bridge (and active preamp) for acoustic-style guitar sounds alongside its traditional magnetic humbuckers.

Thinline-type mahogany body is mated to a maple top, which sports a very fetching Rickenbacker/Mosrite-style German Carve -edge. The top’s edges have been left natural, constituting what is usually called ”fake binding”.

Italia Mondial Deluxe – back beauty

The Mondial comes with a set maple neck.

You can also see the quick-release battery compartment for the 9 V battery used to power the piezo preamp.

Italia Mondial Deluxe – headstock

Italia’s top nut is made from a self-lubricating material containing graphite.

Italia Mondial Deluxe – tuners

We find the same decent-quality tuners on Mondial Deluxe as on the Fiorano.

Italia Mondial Deluxe – fingerboard

Look at the all the nice hues of blues and greens in the guitar’s abalone dots!

Italia Mondial Deluxe – piezo bridge

The Mondial’s bridge may look identical to the Fiorano’s, but this here is a piezo-equipped model. There’s a thin lead going from beneath the bridge and through the maple top to feed the piezo signal to the preamp.

Italia Mondial Deluxe – tailpiece

”I” – stands for Italia…

Italia Mondial Deluxe – pickups

Two vintage-voiced Wilkinson WVC-humbuckers handle magnetic duties on the Mondial Deluxe.

Italia Mondial Deluxe – piezo EQ

The sliders on the guitar’s shoulder control the piezo side’s three-band EQ.

Italia Mondial Deluxe – controls

The magnetic signal is fed to a three-way toggle selector and master volume and tone controls.

There’s a dedicated volume control for the piezo signal, as well as a second output jack, enabling you to feed the acoustic side to a mixing console or a dedicated acoustic amplifier.

****

Italia Fiorano Standard – beauty shot 1+

Italia’s Fiorano Standard is just the guiar for me. It is comfortably lightweight and balances nicely. Its relatively thin body sits nicely against your belly/ribcage, even without any contouring or bevels.

The neck has a nice, mid-depth C-profile, which will feel comfortable to most players. The Fiorano arrived extremely well set-up with a slinky action (E: 1.9 mm/e: 1.7 mm).

Even if you cannot expect a thinline guitar, such as the Fiorano Standard, to out-shout a fat Jazz guitar, the Italia’s spruce-topped mahogany body results in a warm and woody acoustic voice.

In my opinion, P-90s are the best choice for a guitar of this type, because their singlecoil construction makes for a more percussive and dynamic tone than what you’d get from a creamy humbucker.

Played into a clean amp channel you’ll get a nice, clucky attack and a open, yet strong overall voice, that will fit Jazz just as well as Brit Pop, Country, Blues or early Rock’n’Roll (why not add a Bigsby, perhaps?):

If you’re after warm, rich and dynamic dirty tones P-90s are just the ticket! The Fiorano Standard will work great for any Beatles-, Kinks- or Who-inspired player, as well as George Thorogood-style electric Blues:

Italia Fiorano Standard – beauty shot 2

****

Italia Mondial Deluxe – beauty shot 1+

Italia’s Mondial Deluxe is a medium-weight instrument. The well-executed German Carve and very clean fake binding make this guitar look more expensive than it really is.

The neck’s D-profile feels really good. Thanks to its clean fretwork and fine set-up this instrument also plays great (E: 2.0 mm/e: 1.3 mm).

Unplugged, Italia’s Mondial Deluxe is rather quiet, but its fresh acoustic voice and clear attack bode well for things to come.

This hybrid’s piezo sound was the real surprise for me in this review. Italia’s piezo system simply sounds that good and genuinely ”acoustic”:

Naturally, it’s good to hear the Mondial’s magnetic side perform to equally high standards. This guitar’s vintage-voiced Wilkinsons do a fine job of translating the Mondial’s fresh unplugged voice into nice clean tones:

Switching over to the distortion channel will turn the Mondial into a Seventies-style Blues Rock machine:

Italia Mondial Deluxe – beauty shot 2

****

Italia Fiorano Standard – body beauty 1

It’s nigh on impossible not to get a crush on these Italia-guitars: Both the Fiorano Standard and the Mondial Deluxe are distinctly different from the mainstream of guitars on the market, but their design idiosyncrasies  never get in the way of easy playability and great sound. If you want to steer clear of the usual copies, bust still look for a guitar with its own charm, you should definitely check out an Italia.

Italia Mondial Deluxe – body beauty 1

****

Italia Guitars – Fiorano Standard + Mondial Deluxe

Fiorano Standard – approx. 640 €

Mondial Deluxe – approx. 675 €

Finnish distributor: R-JAM Group

****

Pros (both models):

+ idiosyncratic design

+ workmanship

+ finish

+ playability

+ sound

Testipenkissä: Marshall DSL5C

****

Marshall DSL5C – close-up 1

Marshallin DSL5C on DSL-sarjan uusin, ja samalla myös pienitehoisin jäsen.

DSL-sarjan juuret ulottuvat vuoteen 1997, jolloin Marshallin legendaarinen JCM2000 Dual Super Lead -nuppi julkaistiin. JCM2000 oli silloin ensimmäinen Marshall, jossa oli yhdistetty Plexi-tyylinen vintage-kanava ja moderni Ultra Gain -kanava.

Alkuperäisen DSL-sarjan tuotanto lopetettiin vuonna 2007, jolloin JVM-sarja tuli sen tilalle. Uusi DSL-sarja tarjoaa firman edullisimmat putkivahvistimet, joita valmistetaan Marshallin omassa tehtaassa Vietnamissa.

****

Marshall DSL5C – full front

Nimensä mukaisesti Marshall DSL5C (katuhinta noin 520 €) on viisiwattinen, kaksikanavainen putkikombo.

Vahvistimen ulkonäkö – samoin kuin viimeistelyn taso – on ehtaa Marshallia. Vietnamilaisessa tehtaassa laadunvalvonta näyttää pelaavan kiitettävästi, ja kombo tuntuu heti kättelyssä luotettavalta ja kestävältä.

Marshall DSL5C – full back

Kotelon rakenne on DSL5C:n tapauksessa avoin. Takaseinän ylempään aukkoon on asennettu metalliritilä, joka suojaa vahvistinputkia kosketukselta ja kitaristin käsiä kuumilta putkilta.

Marshall DSL5C – valves

Pikku-Marsun putkivarustus koostuu kolmesta etuasteputkesta (ECC83/12AX7) sekä yhdestä pääteputkesta (ECC99/12BH7).

Marshall DSL5C – Celestion Ten 30

DSL5C:n kaiutin on 10-tuumainen, keraamisella magneetilla varustettu Celestion Ten 30, jolle luvataan lämmintä bassorekisteriä, sekä monelle Celestion-kaiuttimelle tyypillistä purevuutta preesensalueella.

Marshall DSL5C – angle 1

Tämä kompakti uutuuskombo painaa vain viisi kiloa, minkä ansiosta se on erittäin helppo kuljettaa sen kumimaisella kahvalla.

****

Marshall DSL5C – front panel

Marshall DSL5C on kaksikanavainen putkikombo:

Ykköskanava – Classic Gain – tarjoaa klassista Marshall 1959 -mallia muistuttavaa soundia ja gain-rakennetta. Classic-kanava ulottuu kirkkaista clean-soundeista keskivahvoihin vintage-säröihin. Koska tähän kanavaan ei ole lisätty omaa Master Volume -säädintä, Classicin särösoundeja saa esiin kuitenkin ainoastaan hyvin kovalla volyymitasolla, silloin kun päätevahvistin on 5 W -moodissa.

Nimensä mukaisesti kakkoskanava – Ultra Gain – on luotu tarjoamaan nykyaikaisia high gain -soundeja.

Molemmille kanaville yhteinen EQ-osasto tarkoittaa luonnollisesti, että soundin kannalta täytyy elää jonkin verran kompromisseja tekemällä, mutta Marshall DSL5C:n tapauksessa tästä ei koidu minkäänlaisia ongelmia.

Tone Shift -kytkimellä saa esiin loudnessmaisia Metal-soundeja, kun taas ilman Tone Shiftiä pikku-Marsulla on täyteläisempi keskialue. Deep-kytkin taas vaikuttaa päätevahvistimen bassotoistoon, ja lisää tarvittaessa muhkeamman bassorekisterin.

Marshall DSL5C – back panel

Takapaneelista löytyy efektilenkin ohella myös liitin pakettiin kuuluvalle kanavavaihto-kytkimelle (katso alla).

DSL5C:n kaappimallinnettu lähtö toimii kahdella eri tavalla, pääteasteen Power-kytkimen asennosta riippuen:

Power täysille jakki on linjatasoinen lähtö mikserille tai äänikortille, ja kombon oma kaiutin toimii myös silloin, kun linjalähtöä käytetään. Low Power -moodissa (käyttöohjeessa lukee 0,5 W, nettisivulla taas 1 W) sama lähtö toimii kuuloketasolla, ja kuulokkeen liittäminen jakkiin mykistää vahvarin oman kaiutinta.

Marshall footswitch

****

Marshall DSL5C – close-up 2

Marshall DSL5C on mielestäni erittäin hyvältä kuulostava Rock- ja Metal-kombo koti-, harjoitus-, äänitys- ja warm up -käyttöön.

Ainoa kritiikkini kohdistuu kombon kaappimallinnettuun lähtöön, joka – ainakin testikoneessa – kohisi enemmän kuin mitä olisin odottanut. Tässä voi kuitenkin olla hyvinkin kyse yksilöviasta.

DSL5C:n kahdesta kanavasta saa esiin hyvin erilaisia soundeja, riippuen etupaneelin gain- ja volume-säädöistä, mutta myös päätevahvistimen Power-kytkimestä. Päätetehon pudottaminen aiheuttaa headroomin kutistamisen, mikä nostaa selvästi kompression määrää entisestään. Power-moodin valinnassa ei siis ainoastaan ole kyse pelkästä volyymistä, vaan myös siitä halutaanko soundista tiukemman (Full Power) vai muhkeamman (Low Power).

Kaikki ääninäytteet on äänitetty Full Power -moodissa.

Tässä ensin Stratocaster soitettu Classic-kanavan kautta Shure SM57 -mikrofonilla poimittuna:

…ja tässä sama pätkä linjalähdön kautta:

Tällainen on mikitetty puhdas soundi Hamer Studio Customin kaulamikillä soitettuna:

…ja sama pätkä linjalähdön kautta:

Tällainen on Straton soundi Ultra-kanavan kautta (Tone Shift on pois päältä) SM57 äänitettynä:

…ja sama pätkä linjalähdön kautta:

Tässä soitan Hamer-kitaraa Drop-D-virityksessä Ultra-kanavaan (Tone Shift päällä):

…ja sama linjalähdön kautta poimittuna:

****

Marshall DSL5C – Hamer Studio Custom

Marshallin viisiwattinen DSL5C sopii loistavasti sekä ensimmäiseksi putkikomboksi (”My first Marshall”) että varttuneen soittajan työkaluna, sellaisissa tilanteissa, joissa isosta styrkkarista on enemmän haittaa kuin hyötyä (esim. kotistudiossa tai olohuoneessa).

DSL5C tuo aidon Marshall-soundin myös pieneen huoneeseen, ja kombon vietnamilaisen alkuperän ansiosta tämän putkivahvistimen hinta on kukkarolle ystävällinen.

Marshall DSL5C – angle 2

****

Marshall DSL5C

Katuhinta noin 520 €

Maahantuoja: EM Nordic

Kiitos DLX Musiikille testivahvistimen lainasta!

****

Plussat:

+ hinta

+ viimeistely

+ soundi

+ päätevahvistimen tehonpudottaja

+ kaappimallinnettu lähtö

+ jalkakytkin kuuluu hintaan

Miinukset:

– linjalähdön kohinataso

Testipenkissä: Mooer

****

Mooer teaser

Musamaailma on hiljattain alkanut tuoda maahan Mooerin erittäin kompakteja kitaraefektejä.

Mooerin tapauksessa kyse on suhteellisen edullisista pedaaleista, joille valmistaja lupaa kuitenkin laadukasta soundia. Koska kitaristin pedaalilaudassa on aina liian vähän tilaa, ja soittajan kukkarossa aina vain rajoitetusti rahaa, Mooer-pedaalien kokeilu luonnollisesti kiinnosti.

****

Mooer Pure Boost – top

Aloitetaan Mooer Pure Boost -boosterilla (54 €), joka tarjoaa 20 dB:n verran puhdasta signaalivahvistusta.

Tämän lisäksi Pure Boost on varustettu hyvin tehokkaalla kaksikaistaisella EQ:lla (+/- 15 dB), sekä Gain-säätimellä, jolla voi lisätä signaaliin pikkuisen putkimaista lämpöä.

Mooer Pure Boost – front

Kaikki Mooer-pikkupedaalit saavat virtansa vain ja ainoastaan Boss-standardin (miinus keskellä) mukaisesta 9V-virtalähteestä, ja vain 6 mA kuluttava Pure Boost on varsinainen energiapihi (mikä on aina hyvä asia).

Pure Boost on true bypass -pedaali – niin kuin kaikki tässä testatut efektit – mikä tarkoittaa, että signaali kulkee suoraan tulosta lähtöön, silloin kun boosteri on kytketty pois päältä.

Mooer Pure Boost – left

Kestävänoloinen Mooer Pure Boost on erittäin kätevä apulainen, kun halutaan nostaa signaalitasoa, kenties myös hieman maustettuna EQ:lla.

Pure Boostilla saa myös nostettua putkivahvistimen puhtaan kanavan särölle tai lisättyä boostaamisella pikkusärölle vielä aimo annoksen lisää säröä.

Ääninäytteessä Fender Stratocasterin signaali menee Mooer Pure Boost -pedaalin kautta Blackstar HT-1R -komboon:

****

Mooer Green Mile – top

Mooer Green Mile (54 €) on firman Tube Screamer -tyylinen overdrive-särö.

Perinteisten Overdrive- , Tone- ja Level-säätimien lisäksi Green Mile tarjoaa vielä kaksipykäläisen moodikytkimen.

Warm-moodissa Green Mile -pedaali toimii tavallisena TS-tyylisenä särönä, jolla on kermainen keskialue ja maltillinen kompressointi. Hot-moodissa lisätään signaalitielle vielä tehokas boosteri.

Green Mile käyttää virtaa hyvin säästeliäästi (7 mA).

Mooer Green Mile – right

Kyllä, hyvin toimii!

Tässä pätkässä Mooer Green Mile on Warm-moodissa. Soitan ensin Stratocasteria puhtaaseen kanavaan, ja sen jälkeen särökanavaan:

****

Mooer Cruncher – top

Punainen Mooer Cruncher (54 €) on distortion-tyyppinen särörasia.

Cruncherin käyttö on hyvin helppo, sillä efekti keskittyy olennaiseen tarjoamalla ainoastaan perinteiset Gain-, Tone- ja Volume-säätimet.

Mooer Cruncher – left

Mooer Cruncher kuulostaa mielestäni varsin herkulliselta. Tästä säröstä lähtee sopivasti potkulla ja purevuudella höystetty Rock- ja Metal-soundi.

Jällen kerran audiopätkässä kuulaan ensin HT-1R:n puhtaan kanavaan menevä vaihtoehto, ennen kun Cruncher soitetaan särökanavaan:

****

Mooer Ensemble King – top

Se on vaaleansininen, sen täyttyy siis olla chorus.

Ensemble King (59 €) on Mooer-pikkuspedujen helppokäyttöinen chorus-pedaali.

Niin kuin kaikkien muiden firman pedaaleissa, myös Ensemble Kingin kotelo on valmistettu kokonaan metallista, ja sen pohjassa on paksu, liukumista estävä kumikerros.

Mooer Ensemble King – right

Pikku-Mooerista lähtee kauniisti tiheä, klassinen chorussoundi, joka sopii mainiosti joka lähtöön. Ensemble Kingin oma kohina on kiitettävän alhainen:

****

Mooer Mod Factory – top

Mooer Mod Factory (75 €) on tämän efektisarjan moniosaaja, joka pystyy tuottamaan peräti yksitoista eri modulaatioefektiä!

Mooer Mod Factory – mode switch

Isolla Mode-kytkimellä valitaan Mod Factoryn efekteistä sen, jota haluaa käyttää.

Mooer Mod Factory – left

Tarjolla ovat chorus, flanger, phaser, envelope phaser, tremolo…

Mooer Mod Factory – right

…stutter, vibrato, Univibe, auto-wah, touch-wah, sekä kehämodulaattori.

Omat suosikkini ovat Mod Factory -pedaalin molemmat phaserit, sen tremoloefekti, sekä tämän Mooerin auto-wah. Olen kuitenkin melko varma, että jokainen kitaristi löytää Mod Factorysta muutaman mielenkiintoisen efektin omaan käyttöön.

Tässä esimerkissä soitan kaikki efektit läpi (aloitan choruksesta):

****

Mooer ShimVerb – top

Mooerin ShimVerb -kaiku (66 €) tarjoaa kolme erilaista kaikutyyppiä:

Room on huonetta (tai studiotilaa) muistuva kaikusoundi, kun taas Spring-vaihtoehto on digitaalinen näköispainos jousikaiusta. Shimmer on ShimVerbin erikoiskaiku, jossa tuodaan kaikuun hieman metallista hohdetta lisäämällä signaaliin kvintin verran ylöspäin nostettua ääntä.

Mooer ShimVerb – left

ShimVerb on tästä kattauksesta ehkä se pedaali, joka puhuttelee minua henkilökohtaisesti vähiten. Ainakin omiin korviini Room on pikkusen liian honottava, eikä Spring-kaiusta löydy niin selvää jousimaista klangia ja pärskettä kuin odotin. Mooerin Shimmer-kaiku on kuitenkin mielenkiintoinen valinta kokeiluhaluiselle kitaristille.

Aloitan äänipätkässä Room-kaiulta:

****

Mooer Reecho – top

Mooer Reecho (75 €) on viivepedaali, joka tarjoaa kolme erilaista delay-tyyppiä:

Analog on Mooerin versio vanhasta analogisesta viivepedaalista, Real Echo on nykyaikainen digitaalinen delay-efekti, ja Tape Echo matkii vanhan nauhakaiun soundia.

Mooer Reecho – right

Mooerin Reecho-pedaalin Time-säätimellä voi säätää viiveajan viiden ja 780 millisekunnin välillä.

Mielestäni Reecho on ilahduttavan suoraviivainen, mutta silti melko monipuolinen delay-pedaali. Analog-moodi soi juuri oikealla tavalla suttuisesti, kun taas Real Echo tarjoaa orgaanisen lämmintä viive-efekiä. Pitkillä viiveasetuksilla Tape Echolla on ehkä hieman liian voimakas nauhahuojunta, mutta Rockabilly- ja Rautalanka-meininkiin soundi sopii kuin piste iin päällä.

Esimerkki alkaa Analog-vaihtoehdosta, sitten tulee Real Echo, ja sitten Tape – viimeisinä toinen Analog-viivellä soitettu pätkä:

****

Mooer Baby Tuner – left

Baby Tuner (49,90 €) on tämän Mooer-sarjan digitaalinen viritysmittari.

Vaikka Baby Tunerin ulkonäkö muistuttaa erästä polyfonista viritysmittaria, tämä pikku-Mooer on kuitenkin perinteinen viritinmittari.

Ison, kirkkailla ledeillä varustetun näyttönsä ansiosta Mooer Baby Tuner on erittäin helposti luettavissa, ja viritysmittari on optimoitu toimimaan moitteettomasti myös seitsenkielisillä kitaroilla ja viisikielisillä bassoilla.

****

Mooerin mikrokokoiset efektipedaalit kyllä tarjoavat roimasti vastinetta rahalle! En väitä, että nämä pikkulootat olisivat boutique-luokan peliä, mutta Mooer-pedaalien soundi on kuitenkin niin hyvässä mallissa, että näitä löytävät varmasti tiensä myös monen ammattimuusikon pedaalilaudalle.

Nyt kokeiltujen pedaalien lisäksi löytyy vielä runsaasti lisää Mooer-efektejä, joihin kannattaa varmasti myös tutustua lähemmin.

****

Mooer  – minikokoiset efektipedaalit

• Cruncher – 54 €

• Ensemble King – 59 €

• Green Mile – 54 €

• Mod Factory – 75 €

• Pure Boost – 54 €

• Reecho – 75 €

• ShimVerb – 66 €

• Baby Tuner – 49,90 €

Maahantuoja: Musamaailma

****

Plussat:

+ hinta-laatu-suhde

+ metallikotelo

+ pieni koko

+ soundi

Review: Amfisound Raudus Bass

Amfisound Guitars is a small company from the northern Finnish town of Oulu. Run by two master luthiers, Amfisound offers a surprisingly wide variety of different guitar and bass models, as well doing a lot of customising and repair jobs. Kitarablogi visited Amfisound’s workshop late last year – read all about it HERE.

Amfisound have introduced a new bass model recently, called the Raudus Bass, which is the subject of this review.

****

Amfisound Raudus Bass – full front

The Amfisound Raudus Bass (prices for EU-customers starting from 2,520 €) clearly takes its inspiration from Fender’s classic Jazz Bass, but this new Finnish (passive) bass offers a number of modern updates and improvements. The easiest things to notice on first sight are probably the added 21st fret and the much deeper cutaway.

Amfisound Raudus Bass – full back

The Raudus sports a body made from Finnish alder and a bolt-on maple neck.

The neck comes finished in a very thin satin lacquer, while the body is gloss finished in a glorious tri-colour sunburst.

Amfisound Raudus Bass – headstock

Our review sample of the Amfisound Raudus features two differences to the basic model – different tuning machines and different pickups.

Amfisound Raudus Bass – tuners

This Raudus comes equipped with a set of Hipshot’s UltraLite tuners (additional charge: 50 €), which are built from aircraft-grade aluminium. The UltraLite machines work extremely smoothly and precisely, and they efficiently cut down on surplus headstock weight, which is a good thing on such a traditionally-inspired long scale bass, such as the Raudus.

The two-way truss rod is accessed from the headstock side of the neck.

Amfisound Raudus Bass – fretboard

The outstanding standard of workmanship displayed in the Raudus-model’s fretwork, is but one of many points bearing clear testament to the world-class standard of Finnish luthiery! This is genuine custom shop quality.

The fretboard is made of Indian rosewood, and it’s sporting 21 medium-jumbo sized frets.

Amfisound Raudus Bass – neck joint

Amfisound’s rounded body heel makes excursions to the dusty end of the neck very comfortable, indeed.

Amfisound Raudus Bass – bridge

The bridge is a quality copy of the original, late-Sixties Fender bridge – if it ain’t broken, don’t fix it.

Amfisound Raudus Bass – pickups

The review sample comes with a set of Jarno Salo Pickups from Finland. The basic version uses Swedish Lundgrens.

Amfisound Raudus Bass – controls

This instrument offers you Jazz Bass-type controls – separate volume-knobs for each pickup, plus a master tone-control.

Amfisound Raudus Bass – electronics

Amfisound’s workmanship is spot-on and very crisp – even under the hood.

Amfisound Raudus Bass – body beauty 2

The list of available custom options from Amfisound is very long, and includes (in the Raudus-model’s case) an ash body, different bridges and/or tuners, as well as active Glockenklang-electronics (among other things). For more detailed information you should contact Amfisound’s Tomi or Sampo.

There’s also a five-string Raudus on offer, which is built with a longer scale of 35 inches.

****

Amfisound Raudus Bass – beauty shot 1

Amfisound’s Raudus Bass is a real corker of an instrument, with its sound and playability second to none.

The flatter-than-vintage fingerboard radius (9.5″) gives the slender neck a suitably modern playing feel. Thanks to Amfisound’s exemplary fretwork, our review sample’s low action (E: 2.0 mm/g: 1.6 mm) was completely free of annoying fret buzz or string rattle.

I’m a devoted Jazz Bass-fan, which made me feel right at home playing the Raudus. Yes, it’s true that the Amfisound offers much better top fret access, but overall this new bass feels like a dear old friend.

And this bass’ sound is outstanding, too, dishing out oodles of classic, Jazz Bass-style tones.

Jarno Salo’s excellent pickups are singlecoil designs, with the bridge pickup being reverse-wound and reverse-polarity in relation to the neck unit. This means that using both pickups together gets rid of any possible electromagnetic hum and buzz (from transformers, lighting or displays).

In terms of sound, these Salo-pickups really give you all those classic tones you’d expect from a bass such as this.

Listen to these three audio clips. Each clip has the neck pickup first, followed by both pickups on, and the bridge pickup going last:

Amfisound Raudus Bass – back beauty 1

****

Amfisound Raudus Bass – beauty shot 2

The Amfisound Raudus Bass is a very fine example Finnish luthiery, there’s no two ways about this. Finns must be very lucky to find such fine instruments right at their doorstep!

****

Amfisound Guitars Raudus Bass

Prices starting from 2,520 € (EU-customers) & 2,032 € (outside the EU)

Hard case included.

Contact: Amfisound Guitars

****

Pros:

+ Made in Finland

+ handmade 

+ workmanship

+ playability

+ sound

Review: Blackstar HT Metal 5 + HT Metal 60

Blackstar HT Metal 60 – logo

Blackstar Amplification’s very popular HT Venue-series has recently been joined by the company’s brand-new HT Metal-range, which offers you valve amplifiers tailored specifically to the needs of Metal-guitarists.

Kitarablogi has received the compact five Watt HT Metal 5-combo – meant for use at home, for warm-up and in the studio – and the chunky three-channel, 60 Watt HT Metal 60 -combo for this review.

****

Blackstar HT Metal 5 – full front

The Blackstar HT Metal 5 (street price around 450 €) is based on the company’s extremely successful HT-5R-valve combo, with the new amp sharing the older model’s main architecture and push-pull power amp.

The HT Metal 5 uses two different valves to amplify your guitar signal – one is an ECC83 (aka 12AX7), the other a model 12BH7.

Instead of a woven speaker cloth – like on the HT-5R – the HT Metal 5-combo sports a very sturdy metal grille.

Blackstar HT Metal 5 – full back

The cabinet is a half-closed affair. The lower third of the back is covered by a metal grille, through which you can spot this Blackstar’s Chinese 12-inch speaker.

This compact combo weighs only 14 kilos, making it very easy to lift and carry around by its single top handle.

Blackstar HT Metal 5 – control panel

The Metal 5’s control panel looks like this (click for a larger picture):

This valve combo features two channels, called Clean and Overdrive. The Clean channel is equipped with a simple tone control, while Overdrive comes with a full 3-band EQ, as well as Blackstar’s patented ISF-control. Turning the ISF-control (ISF stands for Infinite Shape Feature) you can go from a USA-type response (with a loudness-style sound) all the way to what is known as a British tone (with its fatter mid-range).

The HT Metal 5 also comes equipped with a very nice digital reverb.

Blackstar HT Metal 5 – back panel

It is rather surprising to find so many different connectors and pushbuttons on such a small amp:

On the left, you will find the combo’s three speaker outputs.

Next up is Blackstar’s speaker-emulated output. A switch lets you choose between a virtual combo and an emulated stack sound. This output also works with headphones, and when the combo runs on standby.

The effects loop on the Metal 5 can be switched from a nominal signal level of -10 dB to +4 dB.

The line input on the far right allows you to connect your mp3-player to the combo.

Blackstar HT Metal 5 – footswitch

A footswitch for channel switching is included in the price of Blackstar HT Metal 5!

****

Blackstar HT Metal 60 – full front

Blackstar’s HT Metal 60 (street price around 1.000 €) is a three-channel powerhouse meant for live use.

This combo is build around a pair of ECC83-preamp valves and two 6L6s in the power amp.

The HT Metal 60 is equipped with two 12-inch Celestion speakers.

Blackstar HT Metal 60 – full back

The closed-back cabinet aims at giving this amp a stack-style tonality and punch.

Blackstar HT Metal 60 – side handle

Because of the considerable weight (30 kg) of a large tube combo, such as this, the HT Metal 60 has been equipped with two metal handles, installed into the amp’s sides.

Blackstar HT Metal 60 – clean channel

You can choose between two different tonal characters in this Blackstar’s Clean channel, using the Voice-switch: Boutique Clean puts the amp in Class A mode, giving you a very dynamic response, but with less clean headroom than the voicing called Modern Clean.

The channel’s Bass- and Treble-controls make it very easy to find your sound.

Blackstar HT Metal 60 – OD1 + OD2

The HT Metal 60 offers you two distinct overdrive channels – named OD1 and OD2 – which share the three-band-plus-ISF equalisation section.

OD1 has a tad less gain than OD2. Thanks to its slightly less compressed sound, as well as its drier bottom end, OD1 is the ideal choice for chunky and precise rhythm parts.

OD2’s massive gain reserves are combined with very creamy compression, but there’s plenty of bite here, too, to make sure your lead lines cut through with authority.

Blackstar HT Metal 60 – master section

The master section comprises controls for the HT Metal 60’s digital reverb, overall resonance and presence, as well as master volume.

Blackstar HT Metal 60 – back panel 1

You can connect the HT Metal 60 to virtually any other speaker cabinet, thanks to the five speaker outputs found on the back panel.

In addition to Blackstar’s well-designed speaker-emulated output, and the combo’s effects loop, there’s also a switch to access two different types of reverb (labelled ”light” and ”dark”).

Blackstar HT Metal 60 – back panel 2

The blue D-SUB-port is meant for the combo’s chunky FS-7-board (included, see below), that handles channel-switching duties and allows you to turn off the reverb on the fly.

The regular Footswitch-jack allows you to connect an additional footswitch to activate the combo’s internal boost. This boost is factory preset, and its amount cannot be changed by the user.

Blackstar HT Metal 60 – footswitch

****

Blackstar HT Metal 5 – opener

The Clean-channel on the Blackstar HT Metal 5 takes you from totally clean all the way to a mild Blues-crunch.

There’s more than enough volume on tap for living room and studio use. There’s a limited amount of clean headroom, though, which means that you will have to turn down the volume pot on a humbucker-equipped guitar.

This clip is played on a Hamer USA Studio Custom into the Blackstar’s Clean-channel, and recorded using a Shure SM57:

Here’s what the same clip sounds like recorded direct via the speaker-emulated output:

The HT Metal 5 dishes out delicious overdriven and distorted tones by the bucket load. Blackstar’s 12-inch speaker sounds fat and muscular, and makes it hard to believe that you’re listening to such a compact little combo!

Turning the ISF-control up full gives you a great Marshall-style tone, regardless of whether you’re using a mic…

…or the built in DI-output.

With ISF turned to zero the sound leans heavily in a Rectifier-type direction (first the SM57-clip, then the speaker-emulated output):

****

Blackstar HT Metal 60 – opener

Blackstar’s HT Metal 60 naturally offers a much wider tonal palette than its small brother.

You can get two different types of clean sounds, with Boutique Clean being the rounder alternative of the two.

SM57:

Line output:

Modern Clean comes across as brighter and somewhat more compact (first the Shure SM57 -clip, then the speaker emulated output):

Here’s an example of the OD1-channel with the guitar tuned to drop-D.

First the ”British” version (ISF=10):

Then its ”US” counterpart (ISF=0):

With the exact same EQ settings, OD2 has more bite.

ISF=10 (”UK”):

ISF=0 (”USA”):

****

Blackstar-logo 2

In my view, Blackstar’s new HT Metal-series is a fantastic addition to the company’s line-up, which takes the needs of modern Metal-guitarists into full account.

The HT Metal 5’s clean sound is very decent, even if the available headroom isn’t on a par with some larger amps. The distortion-channel is really where it’s all at with this compact combo – you will be floored by the big and fearless nature of the Metal 5’s mighty roar!

The Blackstar HT Metal 60 is the workingman’s Metal-combo. This is a professional grade combo offering both very tasty clean tones, as well as bone-crushingly powerful overdrive and distortion with spades of creamy compression. In all but the largest of venues this combo’s volume levels will surely be more than sufficient, even without adding any external cabinets.

****

Blackstar HT Metal 5 & HT Metal 60

HT Metal 5 – street price ca 450 €

HT Metal 60 – street price ca 1.000 €

Finnish distributor: Musamaailma

****

Blackstar HT Metal 5

Pros:

+ workmanship and finish

+ separate tone-control for Clean-channel

+ OD-channel’s 3-band EQ and ISF

+ big tone

+ speaker-emulated DI-output

+ footswitch inluded

Cons:

– Clean-channel’s restricted headroom

****

Blackstar HT Metal 60

Pros:

+ workmanship and finish

+ metal grips

+ Clean-channel’s Voice-feature

+ Clean-channel has own EQ-section

+ OD-channels’ 3-band EQ and ISF

+ big tone

+ speaker-emulated DI-output

+ FS-7-board included

Pidä blogia WordPress.comissa.

Ylös ↑