Review: Roland Micro Cube GX + Cube-80 GX

cube_gx_family_2_gal

Roland’s popular Cube-series of COSM-combos has recently been updated.

The new Cube GX-amps boast some new features, like the iCube Link (first seen in the Cube Lite), which allows you to use the guitar combo as a soundcard with Apple iOS devices.

****

micro_cube_gx_r_angle_2_gal

The Roland Micro Cube GX (current price in Finland 134 €) is the newest version of one of the most successful battery-powered practice amps ever.

At first glance the GX-version looks very similar to the Micro Cube’s previous incarnation, with only the large Cube logo on the metal grille hinting at the combo’s updated status.

micro_cube_gx_b_back_gal

The Micro Cube GX’ back panel is a good deal smaller than on the last version.

The new combo sports mini-sized headphone and line-level outputs.

micro_cube_gx_batteries_gal

The GX still runs on six AA-batteries, but the new battery compartment is much easier to use.

A power supply can be found in the box.

micro_cube_gx_r_top_gal

The front panel has gotten a serious overhaul:

Above the guitar input you can find the i-Cube Link connector, which allows you to hook up you iPad or iPhone to the combo using the supplied cable. Thanks to the i-Cube Link you can use the GX-amp as the iDevice’s sound-card, as well as record and practice using Roland’s free Cube Jam-app. You can get more info on the Cube Jam-app in Kitarablogi’s Cube Lite review.

Another important new feature of the Micro Cube GX is the Memory-function, which offers you one memory slot per COSM Amp Type. Memory stores all settings of the chosen Amp Type, namely the settings of the Gain-, Volume-, EFX- and Delay-controls.

The tuner section has also received an overhaul. The old Micro Cube came with an electronic tuning fork on-board, giving you an ”a” (or Ab or Abb) to tune to. The brand-new Micro Cube GX comes equipped with a genuine digital tuner. The default setting for the tuner is chromatic, but it can also be set to A-only, which comes in handy when changing strings.

****

cube-80gx_angle_2_gal

The Roland Cube-80 GX (current price in Finland 384 €) is the current top model in the GX-series, offering you 80 Watts of output power through a single 12-inch speaker.

The clearest difference between the predecessor – the Cube-80 XL – and the GX-version is the addition of the i-Cube Link in favour of the old model’s built-in looper.

cube-80gx_back_gal

Also new is the GA-FC-connector on the amp’s back panel, which allows you to use Roland’s guitar amp foot-controller the GA-FC (optional) with the Cube-80 GX.

top_L

This is what the foot-controller looks like. When used with the GX, you can switch amp channels and turn the combo’s EFX-, Delay- and Reverb-sections on/off separately. You can also connect two expression pedals to the GA-FC, if you want to adjust input and output levels on the fly. The Cube-80 GX comes supplied with a special overlay for the foot-controller, so you can change the GA-FC’s labelling to match the correct functions.

cube-80gx_foot_gal

Some things have stayed the same, though, like the rugged design of the Cube-series.

cube-80gx_top_gal

The Cube-80 GX is a three-channel guitar amplifier:

The JC Clean-channel is reserved for ultra-clean tones in the style of Roland’s legendary Jazz Chorus-combo. The Lead-channel, on the other hand, offers you nine different COSM-models, as well as an acoustic simulator for your occasional steel-string needs.

The third channel is the so-called Solo-channel. I say ”so-called”, because actually the Solo-channel is the Cube-80 GX’ memory slot, which you can fill with any amp setting you wish, regardless of whether it is a setting for soloing or not. The crucial difference between the Solo-channel and the other two channels is the fact that the Solo-channel uses its own (stored) settings for the EQ-, EFX-, Delay- and Reverb-sections, while JC Clean- and Lead-channels have to share the current control settings.

Apart from the i-Cube Link, the Cube-80 GX’ features list is very similar to the Cube-80 XL-version. You can get more info on the i-Cube Link and Roland’s free Cube Jam-app in Kitarablogi’s Cube Lite review.

****

micro_cube_gx_r_front_gal

Roland’s brand-new Micro Cube GX offers you even more than its already legendary predecessor. The built-in tuner makes life much easier, and the new i-Cube Link/Cube Jam functionality genuinely adds value to this diminutive powerhouse. If you own an iDevice you will have your own practice set-up up and running in no time.

The little GX-combo also gives you three new sounds – the fantastically über-Metal amp type called Extreme, a fine polyphonic octaver effect, as well as a spring reverb model. The Micro Cube GX’ spring reverb simulation sounds good, but very small area designated for it on the Reverb-control doesn’t allow for much in terms of tailoring the spring reverb. It’s more of an on/off affair.

Overall the GX sounds better than the original Micro Cube, with more realistic amp simulations and clearly less hiss in the effect section.

These four clips have been recorded using a dynamic mic in front of the combo, and playing a Fender Stratocaster:

****

cube-80gx_front_gal

Roland’s new Cube-80 GX is a compact, yet powerful guitar combo for the gigging guitarist.

The sounds on offer cover all bases, and the amp types and effects all sound great. Depending on your guitar of choice there can be a very slight tendency toward a crowded lower-midrange – especially with clean sounds – but this can be easily kept in check with the amp’s nice EQ-section.

I feel that if you want to use the Cube-80 GX live, buying the GA-FC-controller is almost compulsory, as it is the only way you can fully control all the combo’s functions on the fly. 100 euros seems a bit steep in relation to the Cube’s own price tag, but from a practical standpoint the additional outlay makes a whole lot of sense.

Be that as it may, Roland’s Cube-80 GX is a cool amp for both gigging and studio use.

These four examples have been recorded with the same set-up are the Micro Cube GX-clips:

****

cube_gx_family_1_gal

Roland’s Cube GX-series is a good choice if you want a wide variety of different amp tones and effect sounds to choose from. For teaching and/or practising purposes the iOS-compatibility and Roland’s own Cube Jam-app add a lot of value to an already very enticing package.

****

Roland Cube GX-series

Micro Cube GX – 134 €

Cube-80 GX – 384 €

Finnish distributor: Roland Scandinavia

****

Pros:

+ value for money

+ i-Cube Link

+ Micro Cube GX: new Memory-feature 

+ Cube-80 GX: GA-FC-compatibility

+ sound

+ rugged build

Cons:

– Micro Cube GX: spring reverb effect hard to adjust

– Cube-80 GX: price of GA-FC-controller

Review: Marshall Custom JTM1 Offset

****

Marshall Custom Offset – teaser

Last year Marshall celebrated their 50th anniversary by releasing a whole range of limited-edition one-watt combos and half-stacks.

Now we’re in for a cool reprise, as Marshall announced a limited edition of 1,111 of a Custom Offset half-stack in Frankfurt earlier this year. The Custom Offset is based on their JTM1 50th Anniversary amp.

A couple of these rare amps even made it to Finland. Kitarablogi.com managed to get hold of one half-stack for a quick review.

****

Marshall Offset – full front

The Marshall Custom JTM1 Offset (price in Finland approx 1,000 €) takes the JTM1 as its starting point, but takes the concept even further down the vintage road to give the Custom Offset the look the company’s first batch of JTM45 models. There’s the famous light grey/beige grille cloth, and the offset control panel, which has given this amp its name.

Marshall Offset – full back

As can be expected at this price point, the overall workmanship is of a very high standard, indeed.

Marshall Offset – front panel

The head’s gleaming, chrome-plated front panel, as well as the two black metal control knobs, are clear hints at this amp’s exalted limited edition status.

Marshall Offset – back panel

On the chromed back panel you will find the same Power-switch as on last year’s anniversary models. It drops the amp’s output from one Watt down to one-tenth of a Watt.

The Custom JTM1 Offset’s matching cabinet has an impedance of 16 Ohms, but you can also connect 8 Ohm speaker loads via the second output jack.

Marshall Offset – valves

The Custom head is build around the same valve types as the JTM1 head – we find two ECC83/12AX7-valves, as well as a model ECC82/12AU7.

Marshall Offset – cabinet

The closed-type Marshall cab holds a single Celestion G10F-15 10-inch speaker.

****

Marshall Offset – head and cab

What kinds of sounds do we usually associate with a vintage-style Marshall? Probably clean tones with a dry character and not very much headroom. On the overdriven and distorted side of things we’d definitely look for creamy compression with a good sprinkling of mid-range grunt and presence bite .

…and these are exactly the types of tones the Marshallin Offset dishes out in a very tasty manner!

A vintage-reissue Fender Telecaster stays fairly clean at the beginning of the Custom Offset’s gain range, but the British type of dryness is clearly present:

The higher output of my Gibson Les Paul Junior’s P-90 clearly drives the preamp more, which results in a nice bit of added graininess at the same settings, especially in the attack phase of each note:

A double-humbucker’d Hamer USA Studio Custom finally pushes this Marshall into real break-up territory – fantastic for old-school Blues. For completely clean tones with humbuckers you will have to turn down your guitar’s volume control:

****

Turning up the Marshall’s Loudness-control adds more gain to preceedings, but also raises volume levels considerably. The Custom JTM1 Offset is quite a belter for a one-watter, meaning it’s too loud to be played at full-tilt in most apartment buildings.

Luckily for us, there’s the nifty Power-switch on the back panel, which drops the volume down to neighbour-friendly levels. A nice side effect of going oh-point-one Watts is that it also adds another wallop of overdrive into the mix, which is why you can even get some decent Hard ’n’ Heavy-tones out of this tiny rig.

Here’s a taste of what I got at 0.1 Watts and Loudness turned all the way up.

First the Tele…

…next up the Junior…

…and last, but not least, the Hamer:

****

Marshall Offset – front angle

In my view the Marshall Custom JTM1 Offset is a great-sounding little bugger of a half-stack, giving you most of the classic Marshall tones.

Yes, I know that 1,000 euros is a lot of money for such a tiny amp. If you’re purely on the look-out for a very small valve amp for your living-room or project studio, you will probably get more features (and Watts) for your money from other makes or models.

But the Custom Offset clearly isn’t only about being a small amp; instead there’s a great deal of added prestige in such a well-made, limited edition amp build in England by a company of such standing. The Marshall Custom JTM1 Offset is a boutique-class amp for collectors and purists, and seen in this light the price seems rather fair.

If you’re interested I’d recommend speedy action, though, because the availability is, indeed, very limited!

****

Marshall Custom JTM1 Offset

Finnish distributor: EM Nordic

Thanks to DLX Music Helsinki for the loan of the review sample!

****

Pros:

+ quality of workmanship

+ sound

+ Power-switch

+ small size

+ collectability 

****

Marshall Offset – badge

Testipenkissä: LTD AJ-1 Andy James + EC-1000ET Evertune

Tällä kertaa testin aiheina ovat kaksi uutta LTD-mallia:

LTD AJ-1 – body angle 1

LTD AJ-1 on brittiläisen kitaristin, Andy Jamesin nimikkomalli. Andy James on tunnettu progressiivista metallia soittavan Sacred Mother Tongue -bändin kitaristina.

LTD EC-1000ET – body angle 1

LTD EC-1000ET Evertune ei ole jonkun räppärin uusi nimikkomalli, vaan uudenlaisella Evertune-tallalla varustettu sähkökitara. Evertunen juju piilee siinä, että se käytännössä poistaa virittämisen tarpeen sen jälkeen, kun kitara on viritetty kerran.

****

LTD AJ-1 – full front

Vaikka Andy Jamesin LTD AJ-1 (986 €) pohjautuukin selvästi firman Horizon/MH-sarjalaisiin, nimikkomallissa on huomioitu monta Jamesin toivomia detajiratkaisuja.

LTD AJ-1 – full back

Silmiinpistävin ero rivi-Horizoniin on AJ-1:n satiinipintainen musta viimeistely, joka tuntuu erittäin mukavalta, eikä myöskään muutu hikisillä käsillä niin liukkaaksi kuin useat kiiltävät viimeistelyt.

LTD:n vaahterakaula jatkuu yhtenäisenä koko mahonkirungon läpi. Rungon kaareva etupuoli, sekä takapuoleen lisätty syvä viiste tekevät kitarasta hyvin mukavan.

LTD AJ-1 – headstock

Andy Jamesin toiveesta LTD AJ-1:n viritinlavan muoto poikkeaa MH-kitaroiden tavallisesti käytetystä jääkiekkomaila-tyypistä.

Minä en ole henkilökohtaisesti tämän LTD-lavan suurin fani – sen kärjekäs ulkonäkö on minulle yksinkertaisesti jo liian ”Metal”, mutta objektiivisesti katsottuna ei tässä lavassa ole kuitenkin mitään vikaa.

LTD AJ-1 – tuners

AJ-1:n grafiittipitoinen satula tukee laadukkaiden lukkovirittimien toimintaa hienosti.

LTD AJ-1 – inlay

Andy Jamesin oma logo toimii 12:n nauhan kauniina otemerkkinä.

LTD AJ-1 – frets and binding

Testiyksilön reunalistoitukset, upotukset sekä nauhatyö ovat erittäin korkeaa tasoa.

LTD AJ-1 – neck joint

LTD:n sulavasti toteutettu ylimeno kaulalta runkoon helpottaa tuntuvasti otekäden pääsemistä 24:lle nauhalle.

LTD AJ-1 – bridge

Herra James on valinnut omaan nimikkosoittimeensa lukittavan TonePros-tallan. Ylimääräisen, ei-toivotun lisävärähtelyn tehokas poistaminen parantaa yleensä kitaran sointia ja sustainea.

LTD AJ-1 – pickups 2

LTD AJ-1 -mallin mikrofonit ovat aktiivit ja tulevat EMG:n melko tuoreelta Metal Works -sarjalta.

Kaulan viereen on asennettu EMG 66 -humbucker, joka on varustettu Alnico V -magneetilla ja keraamisilla napapaloilla. EMG 66:lle luvataan vintage-tyylistä soundia aktiivipotkulla, mutta ilman bassokaistan puuroutumista.

Tallamikrofoniksi taas on valittu EMG 57, jossa Alnico V:n kumppaneiksi on lisätty teräsnapapaloja hieman pehmeämpää, PAF-maista sointia varten.

LTD AJ-1 – controls

Andy James ei tarvitse tone-säädintä lainkaan, minkä takia se on jätetty hänen nimikkomallistaan kokonaan pois.

LTD AJ-1 – control cavity

Takalokeroiden työnjälki on hyvin siisti. Paristolokeron kansi on kiinnitetty koneruuveilla, mikä on selvästi puuruuveja kestävämpi ratkaisu.

****

LTD EC-1000ET – full front

LTD EC-1000ET (986 €) on tavallisen EC-1000:n Evertune-tallalla varustettu sisarmalli.

Kyseessä on siis liimakaulainen kitara, jolla on mahonkikaulan lisäksi samasta puusta veistetty runko vaahterakannella.

LTD EC-1000ET – full back

Kielitys hoituu EC-1000ET:ssä rungon takapuolelta tallan läpi.

LTD EC-1000ET – headstock

Aitona LTD Deluxe -malliston jäsenenä soittimella on upeat helmiäisupotukset, sekä monikerroksinen reunalistoitus sekä kaulassa että kannessa.

LTD EC-1000ET – tuners

Tyylikkäissä Grover-virittimissä yhdistyy nykyaikainen tarkkuus ja vintage-tyylinen ulkonäkö.

LTD EC-1000ET – fretboard

Palisanteriotelaudassa kohtaavat upeat helmiäisupotukset ja erittäin korkeatasoinen nauhatyö.

LTD EC-1000ET – pickups

LTD EC-1000ET:n mikrofonivarustus koostuu – jo klassikoksi varttuneesta – EMG 60/EMG 81 -parivaljakosta. Tarjolla on siis hyvin fokusoitu keskialue, heleä diskantti, sekä muhkea basso tehokkaassa, aktiivisessa paketissa.

LTD EC-1000ET – controls

Lähimpänä tallaa oleva säädin on tallamikrofonin (!) volume, keskeltä löytyy kaulamikin volume-säädin, ja viimeiseksi tulee EC-1000ET:n master tone.

LTD EC-1000ET – control cavity

Myös tässäkin kitarassa elektroniikkalokero näyttää hyvin asialliselta.

LTD EC-1000ET – Evertune bridge

Evertune-tallan toiminta perustuu käytännössä samoihin fysikaalisiin periaatteisiin kuin esimerkiksi nykyaikainen vibratalla: Evertunen tapauksessa jokaisella kielellä on oma laakeroitu jousijärjestelmä, joka pyrkii pitämään kielen vetoa aina samansuuruisena.

Tallan takareunalla näkyy intonaatiosäätöruuvit, kun taas Evertune-logon yllä olevilla kuusiokoloruuveilla säädetään kielten korkeutta.

LTD EC-1000ET – Evertune mechanics

Tällaiselta Evertune-systeemi näyttää silloin kun takalevy on poistettu.

LTD EC-1000ET – tuning key

Evertune-kitaroilla lavalla olevilla virittimillä ei viritetä soitinta perinteisellä tavalla, vaan niillä säädetään kuinka herkästi kielet reagoivat venytyksiin ja sormivibratoon.

Virittäminen sinänsä hoidetaan kuusiokoloavaimella tallapaloissa. Kuvassa näkyvä avain tulee paketissa mukana, mutta tavallinenkin kuusiokoloavain käy.

Evertunen mukaan talla toimii tehdasvarustuksella normaalivirityksessä (E-e, a = 440 Hz) tavallisilla 009-012 kielisatseilla. Myös toisenlaisten virityksien käyttö pitäisi onnistua, mutta se vaatii aina hieman säätöä (sekä virittimillä että tallassa), minkä takia nopea vaihtaminen esimerkiksi standardivirityksestä drop-D:hen ei onnistu kesken livekeikan.

Hyvin paljon tavallisesta poikkeavia virityksiä – tai kielityksiä – varten täytyy tilata Evertunelta sopivia vaihtoyksiköitä, joita asennetaan perus tallapalojen sijasta. Lisätietoa saa Evertunen käyttöoppaasta: Evertune User Manual

****

LTD AJ-1 – front angle 2

Testissä käynyt LTD AJ-1 on hyvin kevyt kitara, joka tuntuu erittäin mielyttävältä.

Kaulaprofiiliksi on valittu melko matala, mutta kuitenkin pyöreä D, joka antaa soittimelle – yhdessä suuren otelaudan radiuksen kanssa – vauhtikepille tyypillisen tatsin ja soitettavuuden. Andy James -nimikkomalli ei selvästikään ole nuotiokitaraksi tarkoitettu, vaan täysverinen nopeasormisen metallivelhon luottokitara.

LTD AJ-1 – back angle 2

Kun EMG käyttää sanaa ”vintage”, se viittaa ilmiselvästi uusien mikrofoniensa mehevään soundiin, eikä lähtötasoon. Tällä Metal Works -humbuckerilla nimittäin puhtia riittää rutkasti.

Joissakin tapauksissa joutuu varmaan säätämään kitaran volumea hieman pienemmälle, jotta vahvistin pysyisi täysin puhtaana:

Särösoundit taas vain hyötyvät tehokkaista ja täysin hiljaisista EMG-mikrofoneista:

****

LTD EC-1000ET – full angle 2

LTD EC-1000ET on jämäkän tuntuinen Rock-keppi mukavalla keskivertopainolla.

Kaulassa on hivenen verran enemmän lihaa ja pyöreyttä kuin AJ-1-mallissa. Kiiltävän lakkauksen ja EC-1000ET:n hieman kaarevamman otelaudan ansiosta, nojaa tämä kitara enemmän vintagen suuntaan. Klassikkoainesta siis…

On mahdollista, että Evertune-talla lisää soittimelle vähän painoa, mutta selkeästi havaittavissa on, että erikoistallan ansiosta kitara soi erittäin puhtaasti ja pitkällä, tasaisella sustainella.

Vaikka olin säätänyt LTD:n pääsääntöisesti sellaiseksi, että kielten venytykset ja sormivibratot onnistuvat mahdollisimman helposti, oli mukava havaita, että vire pysyy myös rankalla kädellä soitettaessa horjumatta.

LTD EC-1000ET – back angle 1

Soundiltaan tämän kitaran EMG-setti on ehkä neutraalimpi kuin Andy James -mallin varustus, muttei missään nimessä huonompi:

****

LTD AJ-1 – front angle 1

Vau, mikä soitin! LTD AJ-1 on mielestäni erinomainen esimerkki virtaviivaistetusta heavykitarasta. Andy James -malli tarjoaa loistavaa soitettavuutta ja soundia, asianmukaisen tuhdilla lähtötasolla.

LTD EC-1000ET – full angle 1

LTD EC-1000ET on erittäin tyylikäs ja laadukas alusta erikoiselle tallaratkaisulle. Evertune ei ole ehkä paras valinta, jos haluaa vaihtaa nopeasti yhdestä virityksestä toiseen, mutta tavallisessa yleiskäytössä se on suorastaan lyömätön. Tällä kitaralla virittäminen ei enää kuulu kitaristin jokapäiväisiin toimenpiteisiin!

****

LTD AJ-1 Andy James Signature

• 986 €

LTD EC-1000ET Evertune

• 986 €

Maahantuoja: Musamaailma

****

LTD AJ-1 Andy James Signature

Plussat:

+ kevyt paino

+ mattaviimeistely

+ soitettavuus

+ työnjälki

+ soundi

Miinukset:

– jotkut ehkä kaipaa tone-säätimen

****

LTD EC-1000ET Evertune

Plussat:

+ Evertune-tallan toimivuus

+ klassinen ulkonäkö

+ soitettavuus

+ työnjälki

+ soundi

Miinukset:

– ei voi nopeasti vaihtaa virityksien välillä

****

LTD AJ-1 – body angle 2

LTD EC-1000ET – body angle 2

Review: GJ2 Guitars

****

GJ2 Guitars – Arete 4-Star + Glendora NLT + Glendora FR

American guitar guru Grover Jackson is a genuine living legend. When Jackson bought Wayne Charvel’s small shop (in 1978) nobody would have guessed that this man would single-handedly define two new types of electric guitars.

The – mostly bolt-on necked – Charvel guitars from the Eighties kicked off the Superstrat-phenomenon in earnest.

GJ2 Guitars – Concorde 4-Star + 5-Star

The original Jackson-branded instruments became famous as hiogh-octane Metal-guitars, which combined first class playability with bold graphic finishes. The most legendary Jacks model is surely the Concorde/RR, which Grover Jackson developed for Randy Rhoads.

Grover Jackson left Charvel/Jackson at the end of the 80s, and he went on to design instruments for a number of different brands, like Washburn for example. The Charvel and Jackson brands are nowadays part of the huge Fender conglomerate.

Grover Jackson has recently launched a new guitar-making outfit, together with (ex-Fender man) Jon Gold. GJ2 Guitars is a small Californian outfit which concentrates on small-run high-end guitar making.

Kitarablogi.com takes the first five instruments to arrive in Finland for a spin.

****

Glendora NLT – full front

The GJ2 Glendora NLT (this version 1,717 €, incl. gigbag) is the most traditional guitar of our group of five.

The review sample’s body has been crafted from light ash (custom option) and finished in gloss Antique White. The basic version of the Glendora comes with a body made from either basswood, alder or poplar.

Glendora NLT – full back

The satin-finished maple neck joins the body in traditional fashion.

Glendora NLT – headstock

The Glendora’s headstock is a stylish variation on the classic six-in-a-row design.

The tuning machines are quality units from Gotoh.

Glendora NLT – vibrato

The contemporary two-post vibrato bridge is also a Gotoh design. The bar is simply pushed into the block and kept in place by an adjustable nylon collar.

Glendora NLT – body beauty

The rosewood fingerboad sports 22 gleaming jumbo-sized frets.

For his new GJ2 guitars Grover Jackson has perfected a new method of applying a compound radius to the fretboard. A compund radius means that the frets have a steeper curve near the nut and get shallower further up towards the body. This gives you the best of both worlds with easy open position chording and effortless string bending higher up the neck without string choking.

Glendora NLT – body angle

GJ2 Guitars use their own Habanero pickups as standard. Our review sample comes equipped with an HSS-setup, but you can order your Glendora with several different pickup combinations, like the vintage-style SSS or two humbuckers.

The controls comprise a five-way switch, as well as master volume and tone controls.

****

Glendora FR – full front

The Glendora FR (this version 1,930 €, incl. lightweight case) is the Floyd Rose-equipped version of the Glendora.

Glendora FR – full back

Our review instrument comes with a standard body (basswood, alder or poplar), but apart from that the basic build is the same as on the Glendora NLT.

Glendora FR – headstock

One of the custom options available for a surcharge in the Glendora-range is a matching headcap, just like on this guitar.

Glendora FR – vibrato

GJ2 Guitars use only top-drawer quality parts, like the Schaller-made steel Floyd Rose bridge on the Glendora FR.

Glendora FR – body angle

It’s a Habanero-set of two single-coils and one humbucker for this guitar.

****

Arete 4-Star – full front

The GJ2 Arete is one of Grover Jackson’s new designs based on a through-neck. There are three different basic versions of the Arete available, called 3-Star, 4-Star and 5-Star.

The Arete 4-Star (this version 2,231 €, incl. lightweight case) is the middle model, which is crafted almost completely from South-American mahogany. The neck uses three long strips side-by-side for added stiffness.

Arete 4-Star – full back

Two mahogany wings make up the streamlined body. The more affordable Arete 3-Star is made from sapele, while the more expensive 5-Star counterpart gives you several different body woods to choose from.

The Arete 4-Star comes in a hand-rubbed oil finish. The cover plates are made from aluminium.

Arete 4-Star – headstock

The headstock sports one of GJ2 Guitars’ special features – the Invisible Binding. This is achieved by routing out a shallow ”pool” on the headstock’s face, into which a large rosewood plate is then inlaid.

Arete 4-Star – vibrato

All Arete 4-Star guitars are vibrato-equipped – they come either with the same knife-edge bridge as on the Glendora NTL, or with a steel Floyd Rose as on our review instrument.

The black pickup bezels feature a structured surface.

Arete 4-Star – body beauty

The bound rosewood fingerboard sports Mini Bull’s Eye inlays, as well as 22 jumbo frets.

Arete 4-Star – body angle

The basic version of the Arete 4-Star is equipped with two Habanero humbuckers, but you can also order HSS- or HSH-configurations, should you so desire.

The three-way toggle is mounted between the master volume and tone controls. GJ2 Guitars’ cool Flying Saucer-knobs not only look great, but are also easy to adjust.

****

Concorde 4-Star – full front

A through-neck crafted from three side-by-side strips of maple flanked by basswood wings – this is the basic recipe behind the GJ2 Concorde 4-Star (this version 2,768 €, including hard case).

Concorde 4-Star – full back

All Concorde-models feature a full-length, 64.8 cm (25.5-inch) scale.

The Concorde 4-Star is available in five gloss finishes – Jet Black, Stark White, Antique White, Sports Car Red and GJ Blue – and either a Floyd Rose vibrato (as on the review sample) or a Gotoh hardtail bridge.

Concorde 4-Star – headstock

The hardware on a Concorde 4-Star is chrome-plated.

The fretboard is equipped with 22 jumbo frets and pearloid inlays.

Concorde 4-Star – vibrato

The volume knob is easy to reach with your pinkie.

Concorde 4-Star – body beauty

Two Hanbanero humbuckers, one master volume, one master tone control and a three-way toggle – what more does a Rock God need?

Concorde 4-Star – body angle

The placement of the output jack is a nifty little feature.

****

Concorde 5-Star – full front

This is GJ2 Guitars’ ultimate Heavy Dream Machine:

The Concorde 5-Star (this version 4,103 €, incl. hard case) can be had – for an additional charge – finished in a custom finish, such as the Randy Rhoads-style pinstripe graphics on this guitar.

Concorde 5-Star – full back

The back plates of the Concorde-models are made of aluminium.

Concorde 5-Star – headstock

The Concorde 5-Star sports gold-coloured hardware. Our review sample had optional, locking Gotoh-tuners installed.

Ebony is the material of choice for the bound fretboard, as well as the headstock inlay.

Concorde 5-Star – vibrato

Here’s a closer look at the golden Floyd Rose bridge.

Concorde 5-Star – body beauty

The inlays on the Concorde 5-Star are genuine pearl.

Concorde 5-Star – electronics

…and here’s a little peek into the very clean control cavity.

****

Glendora NLT – beauty shot

The feather-light ash-bodied GJ2 Glendora NLT is a fantastic S-style guitar for the connoisseur!

The Glendora’s playability is first-rate, and the guitar’s satin-finished neck, with its oval C-profile feels like an old friend.

Played acoustically there’s a hefty dose of woody dryness and sparkling top end, no doubt thanks to the ash body. The Glendora NLT’s displays an open voice with a nicely clucking attack.

I have only good things to say about GJ2’s Habanero pickups – they sound great, they are dynamically rich and the whole set is well balanced in terms of tone and output level.

Here’s a short clip played using the neck pickup:

Glendora FR – beauty shot

The workmanship, feel and playability of the Glendora FR is the same as in the NLT-version – simply fantastic!

Acoustically there’s maybe a tad more roundness in the mid-range and a slightly fatter bass on display in the Glendora FR, which is probably a result of its standard body. On the other hand, the steel Floyd Rose adds its own sprinkling of presence bite into the mix.

Because the bridge humbucker isn’t overpowering the guitar’s single-coils, there’s plenty of fun to be had using the second switch position (bridge and middle):

Arete 4-Star – beauty shot

The lightweight GJ2 Arete 4-Star is a very comfortable guitar to hold and play.

Thanks to its hand-rubbed oil finish the Arete feels very organic. If you’re a fan of nice wood, then this is the guitar for you.

The neck profile has a nice bit of shoulders to its slightly flattened D-section, and fills out your hand rather nicely.

The Arete’s acoustic voice is warm and open.

GJ2’s Habanera humbuckers clearly follow the boutique-vintage route, which puts tone and dynamics front and centre, instead of sheer brute force. Thanks to this it is very easy to coax a whole trainload of different tasty humbucker-tones from the Arete 4-Star, which will satisfy both the traditionalist, as well as modern Rock- and Fusion-guitarists.

The Flying Saucer knobs have a very positive grip, allowing you to adjust the guitar’s controls precisely.

Here’s a clip I recorded using the bridge humbucker:

Concorde 4-Star – beauty shot

It may come as a surprise to a newbie, but the Concorde 4-Star actually feels extremely comfortable hanging suspended from a guitar strap. Sure, the visuals are very angular, but the feel isn’t.

On the other hand I should stress that the Concorde most probably isn’t the right choice as a couch guitar, because it won’t really stay in your lap. And one more thing – beware of the sharp top horn! But as long as you know this guitar’s boundaries, your in for a fun ride with a light and well-balanced studio- and stage-guitar.

The neck has a chunky D-profile, which is good news for tone and sustain.

The Concorde’s long scale, its maple through-neck, as well as the Floyd Rose system give this guitar a clearer, more precise – and in a positive way – more neutral acoustic tone, when compared, say, to a Gibson Flying V.

The guitar’s Habanero humbuckers do a fantastic job in getting the Concorde 4-Star’s precise attack and growling mid-range across.

The neck ’bucker displays a fluid, flute-like timbre, without any sign of muddiness:

Concorde 5-Star – body angle

In terms of playablity and ergonomics there’s not much to divide the Concorden 5-Star from its 4-Star sibling.

But there are some clear differences in tone, most probably due to the posher 5-Star-version’s ebony ’board. The Concorde 5-Star has some added presence bite and a tad more twang in its attack, resulting in an even livelier tone.

Here’s a clip played using the bridge humbucker:

****

What a great thing that Grover Jackson isn’t content with resting on his (considerable) laurels. These new instruments build upon Mr Jackson’s rich past and vast knowledge, while managing to stay foward-facing and fresh.

The sum of this knowledge and experience, coupled with new building techniques and GJ2 Guitars’ obvious attention to detail, result in a range of instruments I would call the best guitars Grover Jackson has ever made.

This type of quality naturally comes at a price. But in light of GJ2’s comparatively small production runs and the sheer quality on offer here, you truly get what you paid for – boutique quality, made in the USA.

****

GJ2 Guitars

Glendora NLT – starting from 1,368 €

Glendora FR – starting from 1,541 €

Arete 4-Star – starting from 2,594 €

Concorde 4-Star – starting from 2,779 €

Concorde 5-Star – starting from 3,335 €

Finnish distributor: Musamaailma

****

Pros:

+ genuine boutique quality

+ playability

+ sound

+ many custom options

+ GJ2 Habanero-pickups

Cons:

– Concorde-models’ G&G-cases weigh a ton

GJ2 Guitars – logo

Testipenkissä: Marshall Custom JTM1 Offset

****

Marshall Custom Offset – teaser

Viime vuonna Marshall juhli 50-vuotista taivaltaan kokonaisella sarjalla pienissä erissä valmistettuja yksiwattisia puolistäkkejä ja komboja.

Ilmeisesti hyvä vire on jäänyt päälle, sillä tänä keväänä Marshall ilmoitti 1111 kappaleeseen rajoitetusta Custom Offset -puolistäkistä, joka on modifioitu versio JTM1-juhlavahvistimesta.

Muutaman kappaleen erä on hiljattain saapunut Suomeen, josta onnistuimme lainata yhden puolistäkin Kitarablogi-testiin.

****

Marshall Offset – full front

Marshall Custom JTM1 Offset -vahvistimen (hinta noin 1.000 €) lähtökohtana on siis ollut viime vuoden JTM1-juhlamalli. Tämä keräilyvahvistin on kuitenkin viety lähemmäksi firman ensimmäisiä JTM45-malleja käyttämällä alkuperäistä logoa, vaaleata etukangasta sekä keskittämisen sijaan reunaan asennettua etupaneelia, josta vahvari on myös saanut nimensä.

Marshall Offset – full back

Kuten setin korkean hintatason perusteella sopiikin odottaa, on englantilainen työnjälki Offsetin kohdalla erittäin korkealaatuista.

Marshall Offset – front panel

Vahvistimen kromattu etupaneeli sekä sen mustat, metalliset nupit kielivät vahvistinnupin ylevästä boutique-luokan asemasta.

Marshall Offset – back panel

Kromatusta takapaneelista löytyy viimevuotisesta juhlasarjastakin tuttu teho-nappi, jolla Marshallin päätetehon saa pudotettua yhdestä watista 0,1:een wattiin.

Custom JTM1 Offsetin oma kaiutinkaappi toimii 16 ohmin impedanssilla, mutta nuppiin voi liittää myös kahdeksan ohmia vastusta tarjoavia ämyreitä.

Marshall Offset – valves

Custom-nupin putkivarustus on sama kuin viime vuoden juhla-JTM1:ssä – etuasteputkina toimii kaksi ECC83/12AX7-putkea ja pääteputki on malliltaan ECC82/12AU7.

Marshall Offset – cabinet

Tyyppillisen suljetun Marshall-kaapin uumeniin on asennettu yksi 10-tuumainen Celestion G10F-15 -kaiutin.

****

Marshall Offset – head and cab

Millaista soundia yleensä odotetaan vintage-tyyliseltä Marshallilta? Ehkä puhdasta soundia, joka on kirkas, mutta melko kuiva, ja joka ei tarjoa suuria määriä putipuhdasta headroomia. Särösoundilta haetaan varmasti kermaista kompressiota, mutta samalla myös tietynlaista keskialueen rouheutta ja purevuutta.

…ja juuri sellaisia soundeja Marshallin Offset tarjoaa hyvin maukkaalla tavalla.

Fender Telecasterilla sointi pysyy kutakuinkin täysin puhtaana, mutta tyyppillinen brittiläinen kulmikkuus on jo tässä hyvin havaittavissa:

Gibson Les Paul Juniorin P-90 mikrofonin korkeampi lähtötaso aiheuttaa jo pientä, kaunista rakeisuutta etenkin nuottien alkuvaiheissa:

Samoilla säädöilla humbuckereilla varustettu Hamer USA Studio Custom työntää Marshallin selvästi pikkusärön herkkulliseen maailmaan. Täysin puhtaita clean-soundeja täytyy tässä hakea kitaran volume-nuppeja käyttäen:

****

Vääntämällä Marshallin Loudness-potikkaa kaakkoon, soundiin saa yhä enemmän säröä, mutta samalla kasvaa myös volyymitaso. Custom Offset on hyvin kovaääninen puolistäkki yksiwattiseksi vahvistimeksi, eikä täysillä soitettuna vahvistin enää sovi kerrostaloon.

Onneksi on olemassa takapaneelin tehonpudotus-nappi, jolla JTM1 Offset -stäkistä saa ”sisäsiistin”. Toivottuna lieveilmiönä pudottamalla nupin 0,1-wattiseksi myös vahvistimen saturaatio kasvaa, minkä ansiosta Marsusta saa pienellä volyymillä irti hyvin uskottavia heavysoundeja.

Tältä kuulostivat testissä käytetyt kitarat 0,1 W -tilassa ja Loudness täysillä.

Ensin Tele…

…seuraavaksi Junior…

…ja lopulta Hamer:

****

Marshall Offset – front angle

Marshallin Custom JTM1 Offset on mielestäni erittäin hieno pikkustäkki, jolla on juuri sellainen soundi kuin mitä itse hakisin tämänkaltaiselta vahvistimelta.

On kyllä sekin totta, että tuhat euroa on aivan liikaa, jos haetaan ”vain” olohuoneeseen tai pikkustudioon mahtuvaa kitaravahvistinta – pienemälläkin rahalla saa usein jopa enemmän watteja ja ominaisuuksia.

Custom Offsetissa on kuitenkin kyse pitkälti myös rajoitetun painoksen tuomasta prestigestä ja keräilyarvosta sekä Englannissa tehdyn pikkuvahvistimen hienoudesta. Marshall JTM1 Offset on boutique-luokan peli kitarasoiton puristille – ja siinä luokassa se pärjää vallan mainiosti!

On kuitenkin syytä pitää kiirettä, koska Suomeen on saapunut vain muutama kappale tätä mallia, eikä lisää enää tule!

****

Marshall Custom JTM1 Offset

Maahantuoja: EM Nordic

Kiitos DLX Musiikille testiyksilöiden lainasta!

****

Plussat:

+ työnjälki

+ soundi

+ kaksi päätetehoa

+ pieni koko

+ keräilyarvo

****

Marshall Offset – badge

Pidä blogia WordPress.comissa.

Ylös ↑