Review: Tech 21 Fly Rig 5

****

Tech 21 Fly Rig 5 – with Strat

Tech 21 NYC is the company behind many groundbreaking products, such as the SansAmp range of amp modelling stomp boxes, the Bass Driver DI or the all-analogue modelling guitar amps of the Trademark series.

What all these products have in common is that they’re no-nonsense tools to make the life of the gigging and recording guitarist (and bassist) easier.

Tech 21’s newest product is designed to do away with the need to hire a guitar amp for fly-in gigs. It’s an ultra-compact and sleek, pedalboard-style device called the Fly Rig 5.

****

Tech 21 Fly Rig 5 – full top

As you can see from the picture at the start of this review, the Tech 21 Fly Rig 5 (current price in Finland: 299 €) is extremely compact. It will fit in the pouch of a gig bag, as well as in the accessories compartment of many guitar cases. Just pack your guitar, the Fly Rig, a couple of cables and your tuner – and you’re ready to roll!

The Fly Rig 5’s sturdy housing is completely made from metal, and its brushed fascia gives it a cool modern look.

Tech 21 Fly Rig 5 – with PSU

The unit runs on 12 Volts of DC-power (150 mA/centre negative) and the power supply unit is (naturally) included.

Tech 21 Fly Rig 5 – Plexi + Hot

Tech 21 call their new creation the Fly Rig 5, because it features five different main functions/effects.

Two of these functions are grouped together under the Plexi banner. The first one, labelled Hot, is an adjustable clean boost of up to a whopping 21 dB. Secondly, you will find an analogue model of a Marshall Plexi head (based on the Hot-Rod Plexi pedal), with its controls comprising Drive, Tone and Level.

Tech 21 Fly Rig 5 – SansAmp

The next section is called SansAmp and includes Tech 21’s legendary analogue amp (and miked up cabinet) emulator (with three-band EQ), as well as a reverb effect.

Tech 21 Fly Rig 5 – DLA

The last section is labelled DLA (short for delay) and offers you a delay effect with tap tempo. Thanks to the Drift-control you can also dial in grungy tape echo-type wow and flutter.

Tech 21 Fly Rig 5 – front panel

****

Tech 21 Fly Rig 5 – Tech 21 logo

Tech 21’s Fly Rig 5 is really very easy to use: All the controls and footswitches are clearly labelled, and the control knobs of each section light up in a different colour to give you an easy to read visual clue as to which sections are currently on and which are turned off.

There’s one very minor trade-off due to the über-compact nature of this ’board, and that’s the small, slightly fiddly nature of the control knobs. On the other hand, you’re hardly likely to make major adjustments to your settings in the middle of a gig – and gigging is what the Fly Rig was conceived for.

In terms of its sound and performance, Tech 21’s newcomer easily fulfills the high standards guitarists have come to expect of the products of this company. The Fly Rig 5 sounds awesome and does exactly what it says on the tin. This combination of SansAmp, Plexi-style overdrive, booster, delay and reverb delivers the goods for the large majority of guitarists – be it Jazz, Blues, Rockabilly, Pop or Rock, the Fly Rig delivers! Metal and Thrash guitarists will most probably demand more gain and the inlusion of a noise gate, but I’d reckon that the metal crowd aren’t really the intended target group for this type of ’board.

Here’s a run-through of all of the Fly Rig 5’s effects, played on a maple-necked Fender Stratocaster. The clip starts with the Fly Rig turned off:

Here’s a similar run-through using a humucker-equipped Hamer USA Studio Custom, adding a bit more overdrive and a longer delay time:

The Delay-section’s Drift-control makes it easy to simulate tape echo effects:

A ”hidden” feature of the Fly Rig 5 is the possibility to use the Delay-section as a chorus effect. Because a chorus is basically nothing more than a slightly wobbly, very slightly offset doubling of the guitar signal, you can achieve this effect by setting the Delay-section’s Time-control to something very short, and using the Drift-control to adjust the chorus’ depth. Here’s an audio clip of a chorus setting, played with a Strat:

Tech 21 Fly Rig 5 – angle 2 + lights

****

Tech 21 Fly Rig 5 – all on

If you play a lot of fly-in gigs, and have neither the budget nor the manpower to lug a large guitar rig across the globe, Tech 21 NYC’s Fly Rig 5 is a true godsend.

It offers the most important features and effects a guitarist needs on stage or in the studio. And — most importantly – it sounds really great and inspiring.

True, using a device like the Fly Rig may not be as ”authentic” as using a real amp in the eyes of some anoraks, because Tech 21’s brand-new tool doesn’t have the ”kudos” of a mythical vintage amp. But if you’re after a pro-quality, lightweight, no-nonsense solution that will get your sound to the audience with the least amount of fuss and hassle, Tech 21’s Fly Rig 5 is hard to beat!

****

Tech 21 NYC Fly Rig 5

299 €

Finnish distributor: Musamaailma

****

Pros:

+ sturdy, all-metal construction

+ size

+ weight

+ features

+ sound

+ value for money

Cons:

– tiny control knobs

Tech 21 Fly Rig 5 – angle 1

Review: Albion TCT35C

****

Albion TCT35 – with Telecaster

Albion Amplification is a new name on the Finnish market, even though the brand has been in existence since 2010.

Albion’s main man is genuine amp guru and bonafide living legend Steve Grindrod. Mr Grindrod left an indelible mark in the field of amplifier design as Marshall’s chief designer for over 20 years. In the beginning of the Noughties, after leaving Marshall, he also worked for Vox for a few years.

Albion was founded in 2009 as a joint venture between Grindrod and Chinese audio specialists IAG Group. Albion’s guitar and bass amplifiers are produced in their own plant in China under the direct supervision of Steve Grindrod, who has moved there from the UK.

****

Albion TCT35 – full front

The Albion TCT35C (recommended retail price in Finland: 865 €) is part of the company’s TCT-series, which is aimed directly at the guitarist who needs a versatile amp.

The TCT-series offers two-channel, all-valve amplifiers built with a very open architecture that allows for maximum flexibility. At the moment of writing, the TCT-series comprises two combos and three amp heads.

Albion TCT35 – side view 2

The TCT35C has a cabinet made of high-quality birch plywood. The panel carrying the golden script logo is a solid piece of walnut, which has received a piano black finish on our review sample (there’s also a see-through wine red version available).

The overall finishing quality is on a very high level, and the TCT35C looks rather stylish in a businesslike, slightly understated way.

The combo weighs in at about 24 kilos, which is rather moderate for an all-valve amp of this size.

Albion TCT35 – full back

The cabinet features a half-closed back with a sturdy metall grille protecting the valves (or ”tubes”, for our North American friends).

Albion TCT35 – preamp valves

Albion’s TCT35C employs three 12AX7 valves (aka ECC83) in its preamplifier section. A fourth 12AX7 is used as the combo’s phase inverter.

Albion TCT35 – power amp valves

The power amp section churns out approximately 35 Watts of power (RMS), using a pair of 6L6 valves.

All Albion amps use IAG Group’s pro-quality audio transformers, which are well regarded by Hifi-enthusiasts and used in IAG’s Leak and Luxman valve amplifiers.

Albion TCT35 – G1280-VSR-16 speaker

Albion produces all of their PCBs, metal parts and speakers in their own factory to Steve Grindrod’s exacting specifications.

The TCT35C comes equipped with a 12-inch Albion G1280-VSR-16 speaker, which has power rating of 80 Watts and an impedance of 16 Ohms.

Albion TCT35 – footswitch

A two-switch footswitch unit comes supplied with the combo. It allows for channel switching, as well as the muting of the on-board digital reverb unit.

The unit is shipped with the output jack on the right hand side, but if you prefer to have the connector on the left, you can switch things around easily. Simply unscrew the six screws holding the footswitch assembly in the chassis, pull the assemby out, turn it around, put the switches back into the chassis and tighten the screws. Brilliantly easy!

****

Albion TCT35 – front panel

Even though both of the Albion TCT35C’s channels sport the same controls, the channels have been designed differently:

In Channel A the guitar signal is first routed through the EQ-section, before it reaches the main gain stages. In Channel B the signal first goes from the input jack to the gain section and is only then fed into the EQ-department. Even though both channels will give you sounds from clean all the way to high gain, each channel has its own distinct character and ”feel”.

One special feature of TCT-series amps are their twin gain controls – called Gain and Drive. The first amplification stage is called Gain, while the second one is called Drive, and each adds their own type of gain structure and character to a channel’s tone. By experimenting with different combinations of a channel’s Gain and Drive settings you will get a plethora of different sounds and responses to playing dynamics.

Albion TCT35 – front panel 2

The combo’s Master-section offers some additional features for even more tonal flexibility:

The Edge-control is a presence/brightness control for the power amp, which allows you to tailor the TCT35C’s bite to your own requirements. The F’BK-switch (short for ”feedback”) offers you two different power amp responses – you can either go for more bite and a very tight attack or choose a creamier delivery with much more fat compression.

Steve Grindrod has chosen to use digital reverb on his TCT-amps, because they tend to stand up better to the demands of a high gain amp.

Thanks to its output power switch you can also run the combo at only 33 % of its output power. As were dealing with a genuine valve amp here, this power drop also lowers the clean headroom and adds some tasty power amp compression to the signal.

Albion TCT35 – back panel

The TCT35C’s effects loop is deliberately using solid state technology, as Steve Grindrod aims for a clean and transparent signal transfer in this section.

****

Albion TCT35 – side view 1

The Albion TCT35C combo is an extremely flexible guitar amp, thanks to its well-designed channel architecture and its extremely efficient channel equalisers.

This isn’t a one-trick pony at all, but rather a guitar sound enthusiast’s dream machine, offering a large palette of different tones.

Despite the fact that both channels will ”do” clean as well as dirty tones, Channel B will offer you more gain than Channel A. ”Fender-style” and ”Marshall-style” are far too narrow to adequately describe the different characters provided by Channels A and B, but there are clear differences apparent in their mid-range sounds and bass responses.

The effective Channel EQs, as well as the Master-section’s Edge- and Feedback-controls add their bits to the Albion’s versatility. While the TCT35C is quite an intuitive amp to use, I’d still recommend you take your time to find out all the features and sounds this combo has to offer.

These eight audio clips only scratch the surface of what the Albion TCT35C’s tonal versatility.

Let’s start with two clean examples using Channel A; first the Stratocaster:

…followed by a Les Paul-style Hamer Studio Custom:

Here are two crunchy clips played through Channel A. First the Strat:

…and then the Hamer:

These are two crunchy clips using Channel B – the Stratocaster first:

…followed by the double-humbucker Hamer:

And as a finale two high gain examples (Channel B) – starting with the Strat:

…and finishing with the Hamer (in Drop-D):

****

Albion TCT35 – teaser

Wow, what a fantastic amp! I can’t think of any musical genre the Albion TCT35C couldn’t master.

The TCT35C is an extremely versatile valve amplifier offering loads of great sounds. Despite being quite a compact combo there’s plenty of volume on tap.

Steve Grindrod’s vast knowledge and experience in the field of amp design really shows in the way the Albion is put together, as well as in the quality of the sounds on offer in the TCT35C and in the low amounts of hiss (even in high gain settings).

****

Albion TCT35C

Current RRP in Finland – 865 € (street price approximately 800 €)

Finnish distributor: Profitron

****

Pros:

+ excellent value for money

+ versatile gain section

+ separate powerful three-band EQ-sections

+ sound

+ switchable output power

+ footswitch included

Testipenkissä: Albion TCT35C

****

Albion TCT35 – with Telecaster

Albion Amplification on Suomalaisille muusikoille uusi tuttavuus, vaikka firma on valmistunut kitara- ja bassovahvistimia jo vuodesta 2010.

Firman takana on yksi vahvistinalan suurimmista guruista, Steve Grindrod. Grindrod toimi vuodesta 1973 lähtien Marshallin pääsuunnittelijana yli 20 vuotta, minkä jälkeen hän siirtyi 2000-luvun alussa vielä muutamaksi vuodeksi Voxille.

Albion syntyi vuonna 2009 yhteistyönä Grindrodin ja kiinalaisen IAG Group -konsernin välillä. Albion-vahvistimet valmistetaan Kiinassa heidän omassa tehtaassaan Steve Grindrodin johdolla, joka asuu paikan päällä.

****

Albion TCT35 – full front

Albion TCT35C (suositushinta 865 €) kuuluu firman TCT-sarjaan, joka on suunniteltu monipuolisuutta arvostavia kitaristeja varten.

TCT-sarjan vahvistimet ovat kaksikanavaisia täysputkikoneita hyvin avoimella, ja paljon säätövaraa tarjoavalla arkkitehtuurilla. TCT-sarjaan kuuluu tällä hetkellä kaksi komboa ja kolme nuppia.

Albion TCT35 – side view 2

TCT35C:n kotelo on valmistettu laadukkaasta koivuvanerista. Albion-logoa kantava palkki on täyttä pähkinäpuuta, joka on saanut ylleen kiiltävän mustan lakkauksen (myös tummanpunainen versio on saatavilla).

Viimeistelyn taso on kiitettävän korkea ja TCT35C näyttää – ainakin omasta mielestäni – asiallisen tyylikkäältä.

Kombon paino on noin 24 kiloa, mikä on maltillista tämänkokoiselle putkikombolle.

Albion TCT35 – full back

Kotelon selkäpuoli on puoliksi avoin. Putket on sijoitettu turvallisesti metalliritilän taakse.

Albion TCT35 – preamp valves

Albionin TCT35C:ssä kolme 12AX7-putkea (toiselta nimeltään ECC83) on etuvahvistimen perustana. Vahvistimesta löytyvä neljäs 12AX7 toimii tässä kombossa päätevahvistimen vaiheenkääntäjänä.

Albion TCT35 – power amp valves

Päätevahvistin toimii kahdella 6L6-putkella, joista irtoaa noin 35 wattia (RMS) tehoa.

Albion-vahvistimissa käytetään IAG Groupin omia laadukkaita audiomuuntajia, jotka ovat ennestään tuttuja esimerkiksi Hifi-puolen Leak- ja Luxman-putkivahvistimista.

Albion TCT35 – G1280-VSR-16 speaker

Samoin kuin Albionin käyttämät piirilevyt ja metalliosat, myös firman vahvistimissa ja kaapeissa käytetyt kaiuttimet tehdään Albionin omassa tehtaassa Steve Grindrodin tarkkojen speksien mukaan.

TCT35C:hen on asennettu 12-tuumainen Albion G1280-VSR-16, jolla on 16 ohmin impedanssi ja 80 watin tehonkesto.

Albion TCT35 – footswitch

Kombon mukana tulevalla jalkakytkimellä voi vaihtaa vahvistimen kanavia, sekä mykistää kombon digitaalikaiun.

Tehtaalta kytkin toimitetaan siten, että jakki on oikealla puolella. Johdon paikan pystyy kuitenkin vaihtamaan kätevästi ja nopeasti irrottamalla ylhäällä näkyvät kuusi ruuvia, nostamalla kytkinmoduulin ulos kotelosta, ja asentamalla sen toisinpäin. Nerokasta!

****

Albion TCT35 – front panel

Albionin TCT35C tarjoaa kaksi kanavaa, joiden välillä on yksi ratkaiseva ero:

A-kanavassa signaali kulkee ensin EQ-osaston läpi, siis ennen varsinaista gain-osastoa. B-kanavassa taas signaali etenee tulojakista gain-osastoon ja vasta sen jälkeen taajuuskorjaimille. Vaikka kumpikin kanava tarjoaa soundeja puhtaasta high-gainiin, kanavat kuulostavat – ja ”tuntuvat” – juuri näiden eri reitityksien vuoksi erilaiselta.

TCT-sarjassa erikoisuutena ovat kanavien kaksi gain-säädintä – Gain ja Drive. Gain-säätimellä säädetään valitun kanavan ensimmäisen esivahvistusasteen vahvistustasoa. Toista vahvistusastetta taas kontrolloidaan Drive-säätimellä. Yhdistämällä näiden kahden vahvistuspiirien eri vaikutuksia signaaliin, saadaan luotua hyvin erityylisiä soundeja.

Albion TCT35 – front panel 2

Master-osastostakin löytyy muutama TCT35C:n monipuolisuutta tukeva ominaisuus:

Edge-säädin on päätevahvistimeen vaikuttava preesens-/diskanttisuodin, jolla soundiin saa hyvin tarkasti lisättyä oman maun mukaan purevuutta tai pehmeyttä. F’BK-kytkin (lyhenne sanasta ”Feedback”) tarjoaa kaksi erilaista päätevahvistimen perusluonetta – joko hieman purevampi, hyvin tarkalla atakilla varustettu vaihtoehto tai sitten kermaisempi versio muhkealla kompressiolla.

Grindrod on valinnut TCT-sarjaan tietoisesti digitaalisen kaiun, koska se toimii hänen mielestään paremmin tehokkaassa high gain -vahvistimessa.

Tehokytkimen ansiosta Albionin tehon voi pudottaa alhaisemmaksi studio- tai olohuonekäyttöä varten. Koska kyseessä on putkivahvistin, tehon pudottamisen (toivottu) lieveilmiö on pääteasteen alhaisempi headroom ja lisätty kompressio.

Albion TCT35 – back panel

TCT35C:n efektilenkki on toteutettu transistoritekniikalla, koska Steve Grindrod haluaa pitää signaalin mahdollisimman puhtaana tässä kohtaa signaaliketjua.

****

Albion TCT35 – side view 1

Albion TCT35C -kombo on erittäin monipuolinen peli, sen avoimen kanava-arkkitehtuurin ja erittäin tehokkaiden EQ-osastojen ansiosta.

Tämä ei todellakaan ole yhden tai kahden soundin putkivahvistin, vaan kokeilunhaluisen soundimetsästäjän unelmakone, joka kattaa varmalla otteellaan hyvin laajan spektrin soundeja.

Vaikka molemmista kanavista irtoaa sekä puhtaita että särösoundeja, tarjoaa kanava B kuitenkin selvästi enemmän gainia kuin A-kanava. ”Fender-” ja ”Marshall-tyylinen” ovat käsitteinä sinänsä liian kapeat kuvailemaan A- ja B-kanavan perusluonetta, mutta eroja kyllä löytyy etenkin keskialueen soinnissa ja basson muhkeudessa.

Erittäin tehokkaat EQ:t, sekä kombon Edge-säädin ja F’BK-kytkin lisäävät reseptiin ihan omat mausteensa. Albion-kombon käyttö on sinänsä intuitiivista, mutta vahvistin on niin monipuolinen, että kaikkiin ominaisuuksiin kannattaa todellakin tutustua rauhassa.

Nämä kahdeksan audiopätkää ovat vain pieni näyte Albion TCT35C:n tarjoamista soundeista.

Lähdetään liikkeelle kahdella puhtaalla esimerkillä A-kanavan tarjonnasta – ensin Stratocaster:

…ja sitten Les Paul-tyylinen Hamer Studio Custom:

Tässä kaksi crunch-tyylistä särövaihtoehtoa A-kanavasta – Stratocasterilla:

…ja Hamerilla soitettuna:

Tällaisia crunch-tyylisiä soundeja löysin B-kanavasta – Strato ensin:

…sitten tulee Hamer:

Ja lopuksi vielä kaksi high gain -pätkää – ensin vintage-tyylinen Stratocaster:

…ja viimeisenä humbuckereilla varustettu Hamer (drop-D-virityksessä):

****

Albion TCT35 – teaser

Vau, mikä vahvistin! En keksi mikään musiikkilajia, johon Albionin TCT35C-kombo ei sopisi.

TCT35C on erittäin monipuolinen putkivahvistin todella terveellä soundilla, joka on kompaktista koostaan huolimatta varsin kovaääninen.

Steve Grindrodin pitkän linjan vahvistinalan kokemus näkyy Albionin laadukkaassa toteutuksessa, kombon monipuolisissa ominaisuuksissa, sekä TCT35C:n erittäin alhaisessa kohinatasossa (jopa gain-säätimien äärirajoilla).

****

Albion TCT35C

Suositushinta – 865 € (arvioitu katuhinta noin 800 €)

Lisätiedot: Profitron

****

Plussat:

+ hinta-laatu-suhde

+ monipuolinen gain-rakenne

+ tehokkat kolmialueiset EQ:t

+ soundi

+ tehonpudotuskytkin

+ jalkakytkin kuuluu hintaan

Review: Marshall DSL5C

****

Marshall DSL5C – close-up 1

Marshall’s DSL5C combo is the newest – and smallest – member of the DSL-series.

The DSL-range has its roots in the year 1997, when Marshall introduced their – now legendary – JCM2000 Dual Super Lead -head. The JCM2000 was the first Marshall amp that combined a vintage-voiced Plexi-channel and a modern Ultra Gain -channel in one chassis.

The production run of the original DSL-series was discontinued in 2007, with the JVM-range superseding it. The new DSL-series offers the company’s most-affordable all-valve amps to date, which are produced at Marshall’s own facility in Vietnam.

****

Marshall DSL5C – full front

As you can easily guess by its name, the Marshall DSL5C (current street price in Finland around 520 €) is a five-Watt, two-channel combo.

In terms of its looks and the quality of its finish, this is a genuine Marshall. Quality control at the Vietnamese factory seems to as stringent as in Britain, and the combo looks great and feels well-made and sturdy.

Marshall DSL5C – full back

The DSL5C comes with an open back cabinet. The upper opening in the cabinet’s back is covered with a metal grille to keep stray fingers and hot tubes apart form each other.

Marshall DSL5C – valves

This little Marshall uses three preamp valves (ECC83/12AX7), plus a single power amp tube (ECC99/12BH7).

Marshall DSL5C – Celestion Ten 30

The DSL5C’s speaker is a ten-inch Celestion Ten 30, which is meant to provide a big, warm bottom-end, coupled with a healthy dose of ”Celestion grunt” and bite.

Marshall DSL5C – angle 1

This compact combo weighs less than five kilos, making it very easy to carry, using its rubberised handle.

****

Marshall DSL5C – front panel

The Marshall DSL5C is a two-channel, all-valve combo:

Channel one – Classic Gain – is voiced to give you a classic Marshall 1959 -style tone and gain structure. The Classic-channel goes from bright and clean all the way to mid-level, classic crunch. Due to the fact that this channel doesn’t have a master volume, distorted sounds can only be had at very high volume levels – unless you switch to Low Power mode (more on this further down).

True to its name, the second channel – Ultra Gain – is made for modern, saturated high-gain sounds.

Both channels share a three-band EQ-section, which means a certain amount of tonal compromises will have to be made. But thanks to the way both channels have been voiced, a shared EQ doesn’t pose any real problems in the Marshall DSL5C’s case.

Pushing in the Tone Shift switch will give you a thinned out, sharper mid-range, making it ideal for many Thrash Metal tones. Engaging Deep bolsters the bottom-end at the output stage for a fatter sound.

Marshall DSL5C – back panel

The back panel offers you an effects loop, as well as a footswitch jack for the DSL5C’s sturdy channel switch (supplied, see pic below).

There’s a very nifty speaker-emulated output designed into this Marshall combo, which works in two different ways, depending on the setting of the Power-switch:

In Full Power mode the output gives out a line level signal, which can be sent to a mixing console or your recording equipment. The speaker will run even with a plug connected to the output. In Low Power mode (the manual says 0.5 Watts, the website 1 W) the output level is changed to work with headphones, and plugging a pair of cans in will mute the speaker. The Aux In only works in Low-mode, and its signal will be sent directly to the headphones.

Marshall footswitch

****

Marshall DSL5C – close-up 2

In my opinion Marshall’s DSL5C is a fantastic-sounding little Rock- and Metal-combo, ideally suited for use in your bedroom, for practice, for recording and for backstage warm-up.

My only small niggle would be with the emulated output of our review sample, which produced more hiss than what I’d have expected. Anyhow, I was able to EQ out most of the hiss for the sound clips, meaning it really isn’t that much of a problem. And then there’s always the possibility that there was something wrong with this particular combo…

The DSL5C’s two channels enable you to get a wide variety of different Rock-, Metal- and Thrash-sounds out of this little combo, depending on your gain-, volume- and EQ-settings, but also on the power mode chosen. Going to Low Power doesn’t only drop your output levels, but also adds a lot of tasty, squashy power amp compression. This means that you can choose between very tight sounds (Full Power) and fatter, compressed tones (Low Power) by using the switch on the back panel.

All sound clips have been recorded in Full Power mode to allow for direct comparison between the miked up sound of the speaker and the speaker-emulated output.

For starters I played my Stratocaster through a clean setting on the Classic-channel (recorded with a Shure SM57):

…and here’s what the same bit sounds like recorded directly via the emulated output:

Here’s the Classic-channel and the neck pickup of my double-humbucker Hamer Studio Custom (miked up):

…and the same clip recorded direct:

Here’s my Strat into the Ultra-channel (Tone Shift off), recorded with the SM57:

…and its speaker-emulated counterpart:

This is the Hamer, tuned to Drop-D into the Ultra-channel (Tone Shift on), miked up:

…and this is the direct recorded version:

****

Marshall DSL5C – Hamer Studio Custom

Marshall’s cute and cuddly new five-watter, the DSL5C, is a great choice as a first tube combo (”My first Marshall”), as well as a precision tool for any guitarist in those situations, when high wattage is more of a problem than an advantage (like at home or in the project studio).

The DSL5C delivers genuine, all-valve Marshall-tone in a handy package, and the combo’s Vietnamese origin means it’s also very affordable.

Marshall DSL5C – angle 2

****

Marshall DSL5C

Finnish street price ca. 520 €

Finnish distributor: EM Nordic

We’d like to thank DLX Music Helsinki for the loan of the review amp!

****

Pros:

+ value-for-money

+ finish/workmanship

+ sound

+ two power modes

+ speaker-emulated output

+ footswitch included

Cons:

– noise levels of speaker-emulated output (see text)

Testipenkissä: Marshall DSL5C

****

Marshall DSL5C – close-up 1

Marshallin DSL5C on DSL-sarjan uusin, ja samalla myös pienitehoisin jäsen.

DSL-sarjan juuret ulottuvat vuoteen 1997, jolloin Marshallin legendaarinen JCM2000 Dual Super Lead -nuppi julkaistiin. JCM2000 oli silloin ensimmäinen Marshall, jossa oli yhdistetty Plexi-tyylinen vintage-kanava ja moderni Ultra Gain -kanava.

Alkuperäisen DSL-sarjan tuotanto lopetettiin vuonna 2007, jolloin JVM-sarja tuli sen tilalle. Uusi DSL-sarja tarjoaa firman edullisimmat putkivahvistimet, joita valmistetaan Marshallin omassa tehtaassa Vietnamissa.

****

Marshall DSL5C – full front

Nimensä mukaisesti Marshall DSL5C (katuhinta noin 520 €) on viisiwattinen, kaksikanavainen putkikombo.

Vahvistimen ulkonäkö – samoin kuin viimeistelyn taso – on ehtaa Marshallia. Vietnamilaisessa tehtaassa laadunvalvonta näyttää pelaavan kiitettävästi, ja kombo tuntuu heti kättelyssä luotettavalta ja kestävältä.

Marshall DSL5C – full back

Kotelon rakenne on DSL5C:n tapauksessa avoin. Takaseinän ylempään aukkoon on asennettu metalliritilä, joka suojaa vahvistinputkia kosketukselta ja kitaristin käsiä kuumilta putkilta.

Marshall DSL5C – valves

Pikku-Marsun putkivarustus koostuu kolmesta etuasteputkesta (ECC83/12AX7) sekä yhdestä pääteputkesta (ECC99/12BH7).

Marshall DSL5C – Celestion Ten 30

DSL5C:n kaiutin on 10-tuumainen, keraamisella magneetilla varustettu Celestion Ten 30, jolle luvataan lämmintä bassorekisteriä, sekä monelle Celestion-kaiuttimelle tyypillistä purevuutta preesensalueella.

Marshall DSL5C – angle 1

Tämä kompakti uutuuskombo painaa vain viisi kiloa, minkä ansiosta se on erittäin helppo kuljettaa sen kumimaisella kahvalla.

****

Marshall DSL5C – front panel

Marshall DSL5C on kaksikanavainen putkikombo:

Ykköskanava – Classic Gain – tarjoaa klassista Marshall 1959 -mallia muistuttavaa soundia ja gain-rakennetta. Classic-kanava ulottuu kirkkaista clean-soundeista keskivahvoihin vintage-säröihin. Koska tähän kanavaan ei ole lisätty omaa Master Volume -säädintä, Classicin särösoundeja saa esiin kuitenkin ainoastaan hyvin kovalla volyymitasolla, silloin kun päätevahvistin on 5 W -moodissa.

Nimensä mukaisesti kakkoskanava – Ultra Gain – on luotu tarjoamaan nykyaikaisia high gain -soundeja.

Molemmille kanaville yhteinen EQ-osasto tarkoittaa luonnollisesti, että soundin kannalta täytyy elää jonkin verran kompromisseja tekemällä, mutta Marshall DSL5C:n tapauksessa tästä ei koidu minkäänlaisia ongelmia.

Tone Shift -kytkimellä saa esiin loudnessmaisia Metal-soundeja, kun taas ilman Tone Shiftiä pikku-Marsulla on täyteläisempi keskialue. Deep-kytkin taas vaikuttaa päätevahvistimen bassotoistoon, ja lisää tarvittaessa muhkeamman bassorekisterin.

Marshall DSL5C – back panel

Takapaneelista löytyy efektilenkin ohella myös liitin pakettiin kuuluvalle kanavavaihto-kytkimelle (katso alla).

DSL5C:n kaappimallinnettu lähtö toimii kahdella eri tavalla, pääteasteen Power-kytkimen asennosta riippuen:

Power täysille jakki on linjatasoinen lähtö mikserille tai äänikortille, ja kombon oma kaiutin toimii myös silloin, kun linjalähtöä käytetään. Low Power -moodissa (käyttöohjeessa lukee 0,5 W, nettisivulla taas 1 W) sama lähtö toimii kuuloketasolla, ja kuulokkeen liittäminen jakkiin mykistää vahvarin oman kaiutinta.

Marshall footswitch

****

Marshall DSL5C – close-up 2

Marshall DSL5C on mielestäni erittäin hyvältä kuulostava Rock- ja Metal-kombo koti-, harjoitus-, äänitys- ja warm up -käyttöön.

Ainoa kritiikkini kohdistuu kombon kaappimallinnettuun lähtöön, joka – ainakin testikoneessa – kohisi enemmän kuin mitä olisin odottanut. Tässä voi kuitenkin olla hyvinkin kyse yksilöviasta.

DSL5C:n kahdesta kanavasta saa esiin hyvin erilaisia soundeja, riippuen etupaneelin gain- ja volume-säädöistä, mutta myös päätevahvistimen Power-kytkimestä. Päätetehon pudottaminen aiheuttaa headroomin kutistamisen, mikä nostaa selvästi kompression määrää entisestään. Power-moodin valinnassa ei siis ainoastaan ole kyse pelkästä volyymistä, vaan myös siitä halutaanko soundista tiukemman (Full Power) vai muhkeamman (Low Power).

Kaikki ääninäytteet on äänitetty Full Power -moodissa.

Tässä ensin Stratocaster soitettu Classic-kanavan kautta Shure SM57 -mikrofonilla poimittuna:

…ja tässä sama pätkä linjalähdön kautta:

Tällainen on mikitetty puhdas soundi Hamer Studio Customin kaulamikillä soitettuna:

…ja sama pätkä linjalähdön kautta:

Tällainen on Straton soundi Ultra-kanavan kautta (Tone Shift on pois päältä) SM57 äänitettynä:

…ja sama pätkä linjalähdön kautta:

Tässä soitan Hamer-kitaraa Drop-D-virityksessä Ultra-kanavaan (Tone Shift päällä):

…ja sama linjalähdön kautta poimittuna:

****

Marshall DSL5C – Hamer Studio Custom

Marshallin viisiwattinen DSL5C sopii loistavasti sekä ensimmäiseksi putkikomboksi (”My first Marshall”) että varttuneen soittajan työkaluna, sellaisissa tilanteissa, joissa isosta styrkkarista on enemmän haittaa kuin hyötyä (esim. kotistudiossa tai olohuoneessa).

DSL5C tuo aidon Marshall-soundin myös pieneen huoneeseen, ja kombon vietnamilaisen alkuperän ansiosta tämän putkivahvistimen hinta on kukkarolle ystävällinen.

Marshall DSL5C – angle 2

****

Marshall DSL5C

Katuhinta noin 520 €

Maahantuoja: EM Nordic

Kiitos DLX Musiikille testivahvistimen lainasta!

****

Plussat:

+ hinta

+ viimeistely

+ soundi

+ päätevahvistimen tehonpudottaja

+ kaappimallinnettu lähtö

+ jalkakytkin kuuluu hintaan

Miinukset:

– linjalähdön kohinataso

Testipenkissä: Mooer

****

Mooer teaser

Musamaailma on hiljattain alkanut tuoda maahan Mooerin erittäin kompakteja kitaraefektejä.

Mooerin tapauksessa kyse on suhteellisen edullisista pedaaleista, joille valmistaja lupaa kuitenkin laadukasta soundia. Koska kitaristin pedaalilaudassa on aina liian vähän tilaa, ja soittajan kukkarossa aina vain rajoitetusti rahaa, Mooer-pedaalien kokeilu luonnollisesti kiinnosti.

****

Mooer Pure Boost – top

Aloitetaan Mooer Pure Boost -boosterilla (54 €), joka tarjoaa 20 dB:n verran puhdasta signaalivahvistusta.

Tämän lisäksi Pure Boost on varustettu hyvin tehokkaalla kaksikaistaisella EQ:lla (+/- 15 dB), sekä Gain-säätimellä, jolla voi lisätä signaaliin pikkuisen putkimaista lämpöä.

Mooer Pure Boost – front

Kaikki Mooer-pikkupedaalit saavat virtansa vain ja ainoastaan Boss-standardin (miinus keskellä) mukaisesta 9V-virtalähteestä, ja vain 6 mA kuluttava Pure Boost on varsinainen energiapihi (mikä on aina hyvä asia).

Pure Boost on true bypass -pedaali – niin kuin kaikki tässä testatut efektit – mikä tarkoittaa, että signaali kulkee suoraan tulosta lähtöön, silloin kun boosteri on kytketty pois päältä.

Mooer Pure Boost – left

Kestävänoloinen Mooer Pure Boost on erittäin kätevä apulainen, kun halutaan nostaa signaalitasoa, kenties myös hieman maustettuna EQ:lla.

Pure Boostilla saa myös nostettua putkivahvistimen puhtaan kanavan särölle tai lisättyä boostaamisella pikkusärölle vielä aimo annoksen lisää säröä.

Ääninäytteessä Fender Stratocasterin signaali menee Mooer Pure Boost -pedaalin kautta Blackstar HT-1R -komboon:

****

Mooer Green Mile – top

Mooer Green Mile (54 €) on firman Tube Screamer -tyylinen overdrive-särö.

Perinteisten Overdrive- , Tone- ja Level-säätimien lisäksi Green Mile tarjoaa vielä kaksipykäläisen moodikytkimen.

Warm-moodissa Green Mile -pedaali toimii tavallisena TS-tyylisenä särönä, jolla on kermainen keskialue ja maltillinen kompressointi. Hot-moodissa lisätään signaalitielle vielä tehokas boosteri.

Green Mile käyttää virtaa hyvin säästeliäästi (7 mA).

Mooer Green Mile – right

Kyllä, hyvin toimii!

Tässä pätkässä Mooer Green Mile on Warm-moodissa. Soitan ensin Stratocasteria puhtaaseen kanavaan, ja sen jälkeen särökanavaan:

****

Mooer Cruncher – top

Punainen Mooer Cruncher (54 €) on distortion-tyyppinen särörasia.

Cruncherin käyttö on hyvin helppo, sillä efekti keskittyy olennaiseen tarjoamalla ainoastaan perinteiset Gain-, Tone- ja Volume-säätimet.

Mooer Cruncher – left

Mooer Cruncher kuulostaa mielestäni varsin herkulliselta. Tästä säröstä lähtee sopivasti potkulla ja purevuudella höystetty Rock- ja Metal-soundi.

Jällen kerran audiopätkässä kuulaan ensin HT-1R:n puhtaan kanavaan menevä vaihtoehto, ennen kun Cruncher soitetaan särökanavaan:

****

Mooer Ensemble King – top

Se on vaaleansininen, sen täyttyy siis olla chorus.

Ensemble King (59 €) on Mooer-pikkuspedujen helppokäyttöinen chorus-pedaali.

Niin kuin kaikkien muiden firman pedaaleissa, myös Ensemble Kingin kotelo on valmistettu kokonaan metallista, ja sen pohjassa on paksu, liukumista estävä kumikerros.

Mooer Ensemble King – right

Pikku-Mooerista lähtee kauniisti tiheä, klassinen chorussoundi, joka sopii mainiosti joka lähtöön. Ensemble Kingin oma kohina on kiitettävän alhainen:

****

Mooer Mod Factory – top

Mooer Mod Factory (75 €) on tämän efektisarjan moniosaaja, joka pystyy tuottamaan peräti yksitoista eri modulaatioefektiä!

Mooer Mod Factory – mode switch

Isolla Mode-kytkimellä valitaan Mod Factoryn efekteistä sen, jota haluaa käyttää.

Mooer Mod Factory – left

Tarjolla ovat chorus, flanger, phaser, envelope phaser, tremolo…

Mooer Mod Factory – right

…stutter, vibrato, Univibe, auto-wah, touch-wah, sekä kehämodulaattori.

Omat suosikkini ovat Mod Factory -pedaalin molemmat phaserit, sen tremoloefekti, sekä tämän Mooerin auto-wah. Olen kuitenkin melko varma, että jokainen kitaristi löytää Mod Factorysta muutaman mielenkiintoisen efektin omaan käyttöön.

Tässä esimerkissä soitan kaikki efektit läpi (aloitan choruksesta):

****

Mooer ShimVerb – top

Mooerin ShimVerb -kaiku (66 €) tarjoaa kolme erilaista kaikutyyppiä:

Room on huonetta (tai studiotilaa) muistuva kaikusoundi, kun taas Spring-vaihtoehto on digitaalinen näköispainos jousikaiusta. Shimmer on ShimVerbin erikoiskaiku, jossa tuodaan kaikuun hieman metallista hohdetta lisäämällä signaaliin kvintin verran ylöspäin nostettua ääntä.

Mooer ShimVerb – left

ShimVerb on tästä kattauksesta ehkä se pedaali, joka puhuttelee minua henkilökohtaisesti vähiten. Ainakin omiin korviini Room on pikkusen liian honottava, eikä Spring-kaiusta löydy niin selvää jousimaista klangia ja pärskettä kuin odotin. Mooerin Shimmer-kaiku on kuitenkin mielenkiintoinen valinta kokeiluhaluiselle kitaristille.

Aloitan äänipätkässä Room-kaiulta:

****

Mooer Reecho – top

Mooer Reecho (75 €) on viivepedaali, joka tarjoaa kolme erilaista delay-tyyppiä:

Analog on Mooerin versio vanhasta analogisesta viivepedaalista, Real Echo on nykyaikainen digitaalinen delay-efekti, ja Tape Echo matkii vanhan nauhakaiun soundia.

Mooer Reecho – right

Mooerin Reecho-pedaalin Time-säätimellä voi säätää viiveajan viiden ja 780 millisekunnin välillä.

Mielestäni Reecho on ilahduttavan suoraviivainen, mutta silti melko monipuolinen delay-pedaali. Analog-moodi soi juuri oikealla tavalla suttuisesti, kun taas Real Echo tarjoaa orgaanisen lämmintä viive-efekiä. Pitkillä viiveasetuksilla Tape Echolla on ehkä hieman liian voimakas nauhahuojunta, mutta Rockabilly- ja Rautalanka-meininkiin soundi sopii kuin piste iin päällä.

Esimerkki alkaa Analog-vaihtoehdosta, sitten tulee Real Echo, ja sitten Tape – viimeisinä toinen Analog-viivellä soitettu pätkä:

****

Mooer Baby Tuner – left

Baby Tuner (49,90 €) on tämän Mooer-sarjan digitaalinen viritysmittari.

Vaikka Baby Tunerin ulkonäkö muistuttaa erästä polyfonista viritysmittaria, tämä pikku-Mooer on kuitenkin perinteinen viritinmittari.

Ison, kirkkailla ledeillä varustetun näyttönsä ansiosta Mooer Baby Tuner on erittäin helposti luettavissa, ja viritysmittari on optimoitu toimimaan moitteettomasti myös seitsenkielisillä kitaroilla ja viisikielisillä bassoilla.

****

Mooerin mikrokokoiset efektipedaalit kyllä tarjoavat roimasti vastinetta rahalle! En väitä, että nämä pikkulootat olisivat boutique-luokan peliä, mutta Mooer-pedaalien soundi on kuitenkin niin hyvässä mallissa, että näitä löytävät varmasti tiensä myös monen ammattimuusikon pedaalilaudalle.

Nyt kokeiltujen pedaalien lisäksi löytyy vielä runsaasti lisää Mooer-efektejä, joihin kannattaa varmasti myös tutustua lähemmin.

****

Mooer  – minikokoiset efektipedaalit

• Cruncher – 54 €

• Ensemble King – 59 €

• Green Mile – 54 €

• Mod Factory – 75 €

• Pure Boost – 54 €

• Reecho – 75 €

• ShimVerb – 66 €

• Baby Tuner – 49,90 €

Maahantuoja: Musamaailma

****

Plussat:

+ hinta-laatu-suhde

+ metallikotelo

+ pieni koko

+ soundi

Musikmesse 2014: Fender American Deluxe Strat Plus

Fender American Deluxe Strat Plus

Fenderin American Deluxe Strat Plus on firman ensimmäinen sähkökitara ilman perinteisiä juotosliitoksia. Fender tulee tarjoamaan mallille erilaisia mikrofonivaihtoehtoja ja mikkien vaihtaminen on nyt huomattavasti helpompi, koska juotoskolvea ei tarvita.

Erikoisinta on Deluxe Strat Plussissa kuitenkin sen kytkentäkortti-ominaisuus. Rungon takapuolelta löytyy korttipaikka Fenderin Personality Card -kytkentäkorteille, jotka mahdollistavat kitaran modifioinnin muutamassa sekunnissa. Kitaran mukaan tulevat kolme korttia, joista Standard-kortti tarjoaa Stratocasterin perinteistä kytkentää. Cutter-kortilla kitaran tone-potikat muuttuvat, niin että toisesta tone-säätimestä tulee bassofiltteri, joka ohentaa kitaran soundia. Blender-kortilla taas saa lisättyä toisella tonella kaulamikrofonin signaalia myös sellaisissa kytkinasemissa, joissa se olisi normaalisti pois päältä. Cutter- ja Blender-kortit tarjoavat myös omia minikytkimiä, joilla saa muutettua tone-kondensaattorien arvoja.

Wiring card on a Fender American Deluxe Strat Plus

Pidä blogia WordPress.comissa.

Ylös ↑